The first is to use a single temper of wire so that the coil of rings made for a particular project has similarly formed rings. A dead-soft tempered wire formed on a steel mandrel will give you a consistently wound coil from which to cut your rings.
The second factor is to use a good tool for cutting the rings. A jeweler's saw and saw blade will cut through the rings and leave a flush end on each wire end. Alternatively, a pair of good flush-cutters will also work. The better the tool the less the "pinch" you will have at the wire end of the jumpring. Another feature to consider is a sharp pointy tip on the flush-cutting pliers.
The third factor is to use two good tools to close the jumprings securely when assembling your chainmaille project. Flat-nose, chain-nose and bent-nose pliers all open and close jumprings nicely--choose two of your favorites.
In some cases, you may want to use a jumpring tool to open and close jumprings. View ''Using a Jumpring Tool'' how-to video and illustrated instructions to learn about this alternative to pliers.
- Sandra Lupo, Jewelry Designer and Instructor and SWAROVSKI ELEMENTS Ambassador
- Ring mandrels
- Bent-nose pliers
- Chain-nose pliers
- Flat-nose pliers
- Flush-cutter pliers
- Jumpring tool
- Jeweler saw
- Saw blades
- Bench-pin combo set
- Chainmaille Books:
- ''Making Jumprings with Jumpring Mandrels'' how-to video and illustrated instructions
- ''Inserting a Saw Blade into a Jeweler's Saw Frame'' how-to video and illustrated instructions
- ''Sawing Metal'' how-to video and instructions
- ''Jeweler Saw Blade Guide'' chart
- View chainmaille design inspirations from the Gallery of Designs