Close
Home
Beading Resources > Ask the Experts

Topics: Adhesive,Two-Part Epoxy

Q.
I use Devcon's two part epoxy 30-min. for my metal jewelry projects. I have had a few customers contact me because their jewelry came apart--esp. during the winter. Does it become brittle? How do I fix this problem?
- Amy
A.
Devcon's 5-minute and 30-minute two-part jeweler's epoxy works well for most jewelry projects but there are a few important things to keep in mind.
  • Properly preparing the surfaces to be glued is a huge factor in successful gluing. Clean each surface with alcohol. Many folks use the popular "green" cleaning products on the market right now which clean well but can leave a slight residue that will interfere with the glue working correctly, so it's best to just use alcohol to clean the surface right before gluing.
  • If bonding two metal surfaces together, you must rough them up so they have "a tooth" for the glue to adhere to. You also want to be sure to mix two equal parts and apply enough glue for a successful bond.
  • Let the glue fully cure. Just because the glue "looks" dry to the touch does not necessarily mean it's fully cured. Follow the manufacturer's directions carefully. The bond can be compromised by wearing/moving the jewelry too soon.
- Kristal Wick, Designer, Author, Jewelry Making Expert and Swarovski Ambassador

MaterialsResources

Products sold by Fire Mountain Gems and Beads® are intended for experienced jewelry-makers and designer-artists;
children 14 years of age or younger should use these products with adult direction.

Fire Mountain Gems and Beads, Inc. - One Fire Mountain Way, Grants Pass, OR USA 97526-2373
Copyright 2008-2014 Fire Mountain Gems and Beads, Inc. All rights reserved.