Close
Free Pair of SWAROVSKI ELEMENTS 12mm Butterfly Beads with Swarovski Crystal Purchase
Jewelry Making How-To Videos


 Wire Jig, How-To 

Presented by Arbel, Advertising Designer, Marketing Events Group, Exclusively for Fire Mountain Gems and Beads®
690Z


A wire jig offers you the ability to make great shapes from wire and to make them consistently.

: : : Materials : : :
End of Materials List
Step 1
On a piece of graph or plain white paper, draw the placement of your pegs. Once you're familiar with the jig, you can skip this step and just place the pegs into your jig.
Step 2

The top diagram is the wire jig with paper pattern. Place the paper over the jig and insert the pegs into the holes as illustrated in the bottom diagram. Note the different size peg used in the design on the left-hand side.
Step 3
Make a loop on the end of your wire. Place the loop over the first peg.
Step 4
Wrap the wire around the pegs.
Step 5
Remove the shapes from the pegs and adjust as needed. Note how the end of the earring finding is bent slightly at the tip; how the end of the wire is wrapped twice under the first loop in the center shape; and how the waves were compressed to make a tighter shape--these are just suggestions; let your creativity shape your wire designs!

Have a question regarding this project? Email Customer Service.

Copyright Permissions

Permission to copy this instruction sheet is granted for non-commercial educational purposes only. All other reproduction requires written permission. Please email copyrightpermission@firemtn.com for more information.

All products sold by Fire Mountain Gems and Beads® are not intended for use by children 14 years of age and under.

Fire Mountain Gems and Beads, Inc. - One Fire Mountain Way, Grants Pass, OR USA 97526-2373
Copyright 2008-2014 Fire Mountain Gems and Beads, Inc. All rights reserved.