Close
Free Pair of SWAROVSKI ELEMENTS 12mm Butterfly Beads with Swarovski Crystal Purchase
Jewelry Making How-To Videos

Free Beading Instructions > How-To Videos > Secrets to Using Bead Caps

 Secrets to Using Bead Caps 

Presented by Marlynn McNutt, Exclusively for Fire Mountain Gems and Beads®
790A
Top off a bead using a bead cap. Finish it with a simple loop that attaches easily and securely to a link on a chain or pair of earrings for a simple and stylish dangle.


We're sorry, your browser does not have the necessary Flash player installed to view the content you selected.

Get Adobe Flash Player
click hereto install the latest Flash Player.
**Before installation, please close all other open browser windows.
: : : Materials : : :
End of Materials List
Step 1
Place a bead and a bead cap onto a headpin. Using chain-nose pliers, grip the wire right above the bead cap and bend the wire to a 90 degrees angle.
Step 2
Hold the flush-cutters so the flat side is facing the bead and trim the excess wire to 3/8 inch.
Step 3
Grip the tip of the cut wire with your round-nose pliers. Rotate your wrist, wrapping the wire around one barrel of the pliers to create a loop.
Step 4
Using chain-nose pliers, open the loop of one dangle up and not out to the side. Add the open loop to one link in the chain and close the loop to secure.

Repeat adding drops all along the length of the chain.

Have a question regarding this project? Email Customer Service.

Copyright Permissions

Permission to copy this instruction sheet is granted for non-commercial educational purposes only. All other reproduction requires written permission. Please email copyrightpermission@firemtn.com for more information.

All products sold by Fire Mountain Gems and Beads® are not intended for use by children 14 years of age and under.

Fire Mountain Gems and Beads, Inc. - One Fire Mountain Way, Grants Pass, OR USA 97526-2373
Copyright 2008-2014 Fire Mountain Gems and Beads, Inc. All rights reserved.