Designing with Glue-on Bails 9C02
We're sorry, your browser does not have the necessary
Flash player installed to view the content you selected.
to install the latest Flash Player.
**Before installation, please close all other open browser windows.
Select a stone with a flat side that will accommodate the flat pad of the glue-on bail. Then select the glue-on bail to use.
Turn the bail until the flat side is showing with the small reservoirs. There will be a thin line of metal separating the reservoirs.
Add a line of glue following the metal line between the reservoirs using an instant glue like LocTite 454 gel. This is an instant glue and sets in about 5 seconds.
Line the stone up over the flat part of the bail and determine the best location for the bail to be glued onto the stone.
Set the stone down onto the bail and press down with a finger for about 5 seconds.
Attach the new pendant you just created to a finished chain or cord and the new piece of jewelry is ready to wear.
Permission to copy this instruction sheet is granted for non-commercial educational purposes only. All other reproduction requires written permission. Please email
for more information.