%>
Close
Home
Beading Instructions

Beading Resources > Free Beading Instructions > > How to Create a Wire Band

 How to Create a Wire Band 

by Sandra Lupo, Metalsmith, Jewelry Designer and Instructor and SWAROVSKI ELEMENTS Ambassador, Exclusively for Fire Mountain Gems and Beads®
D12M
: : : Materials : : :
End of Materials List
Step 1
Cut lengths of square wire suitable to your design. Lay the lengths of wire side-by-side so they are ready for banding.

Cut a single piece of 20-, 21-, 22- or 24-gauge half-round wire long enough to wrap the square wires and create the number of wraps you intend.
Step 2
Choose the banding pliers suitable to the square wire selected for your design--either 20/21-gauge or 22/24-gauge wire. Open the pliers then center the half-round wire across the channel.

Note: Half-round wire should be placed with the flat side of the wire face up so it will make contact with the plunger of the tool.
Step 3
Depress the handles of the pliers, bringing the plunger down to form right angles in the wire.
Step 4
Open the pliers and remove the wire.
Step 5
Place the double right-angled half-round wire onto the parallel bundle of square wires and hug the bundle for a tight fit.
Step 6
Working on one side, using pliers or your hands, bring the wire around the bundle of square wires and continue to wrap tight and close.
Step 7
Continue wrapping as desired, snip and use bent chain-nose pliers to secure the half-round wire end.

Repeat this for the other wire end.

You can add more bands to add structure or aesthetics to your design. The band can then be shaped to form a bangle, other design element or piece of jewelry.
: : : Additional Resources : : :
End of Additional Resources

Have a question regarding this project? Email Customer Service.

Copyright Permissions

Permission to copy this instruction sheet is granted for non-commercial educational purposes only. All other reproduction requires written permission. Please email copyrightpermission@firemtn.com for more information.

Products sold by Fire Mountain Gems and Beads® are intended for experienced jewelry-makers and designer-artists;
children 14 years of age or younger should use these products with adult direction.

Fire Mountain Gems and Beads, Inc. - One Fire Mountain Way, Grants Pass, OR USA 97526-2373
Copyright 2008-2014 Fire Mountain Gems and Beads, Inc. All rights reserved.