Close
Free Pair of SWAROVSKI ELEMENTS 12mm Butterfly Beads with Swarovski Crystal Purchase
Beading Instructions

Beading Resources > Free Beading Instructions > Projects > Pendant with Labradorite Gemstone Cabochon, Seed Beads and Czech Glass Beads

 Pendant with Labradorite Gemstone Cabochon, Seed Beads and Czech Glass Beads 

Courtesy of Fashion Magazine
D16K


Freaks of Winter in St Petersburg Necklace
: : : Materials : : :
  • Bead, Swarovski crystal, crystal clear, 4mm Xilion bicone
  • Bead, Czech glass, black with rainbow coating, 4mm (A)
  • Bead, Czech glass, black, drilled top to bottom 6x10mm (B)
  • Bead, Czech glass, black, 5x8mm flat (C)
  • Bead, Czech glass, black, 12mm round (D)
  • Bead, Czech glass, black, oval with three facets 3x5mm (E)
  • Seed bead, Toho, glossy black, 3mm cubic (I)
  • Seed bead, Toho, glossy black, size 8 (K)
  • Seed bead, Toho, glossy black, size 11 (J)
  • Seed bead, Toho, transparent silver lined, size 11 (H)
  • Seed bead, iris metalized green, size 15, (F)
  • Seed bead, transparent with a rainbow coating, size 15 (G)
  • Cabochons, labradorite, 25x45mm
  • Paperboard
  • Soutache, white
  • Soutache, black

  • Optional:
  • Beads, Czech glass 
  • Cabochons, labradorite 
  • Seed and bugle beads 
  • Magnetic clasps 
  • Memory wire 
  • Leather 
  • Beading foundations 
  • Glues and adhesives 

  • The capital letters above are the bead key identifiers, which are referenced throughout the instructions.
    End of Materials List

    Pendant

    Step 1
    Glue the cabochon to the fabric. Let the glue dry. Work a backstitch in I around the cabochon, trying to fix beads close to the cabochon. When the row is finished run through all the beads, pulling the thread taut. Trim away all the excess fabric close to the last bead row.
    Step 2
    Picture 1
    Take two lengths of black soutache, 3-1/3" (1cm) each. Melt the ends with the help of a cigarette lighter. Sew both soutache braids together, trying to run through the groove. Attach the soutache along the cabochon perimeter (Picture 1). Work two pendants in A, B and G at the bottom of the cabochon. Embroider one half of the cabochon in A and G. Now put your cabochon back side down on a piece of leather and trace its outline using a pen. Put this piece of leather aside as you will need it later.
    Step 3
    Picture 2
    Fold white soutache in half and attach it to the black one of the same length, fixing them together with a few stitches. Do not forget to melt soutache ends with a cigarette lighter each time you cut a new length of soutache braid! Sew the ends to the fabric from the wrong side of the cabochon. Attach these newly cut soutache braids to the black soutache of the cabochon framing.
    Step 4
    Figure 1
    Make the soutache loops (Picture 2); the figures specify the sequence of work. Bead a freeform mesh in F and A inside each loop. (Fig. 1). A tip. You do not need to work all the loops in one length of soutache, as it is not very comfortable. Divide it into several pieces, one for each loop. Work each loop separately, fill in the free space inside the loops as mentioned above and then attach the loops to the back side of your cabochon.
    Step 5
    Figure 2
    Cut out the traced leather pattern (see Step 2). Then put the pattern on the paperboard and transfer its outline. Now remove the leather and draw a second line approximately 1/16’’ (2mm) inside of the traced line. Use scissors to cut out the paperboard pattern and then glue the cabochon onto it. Let the glue dry.
    Step 6
    Figure 3
    Bead around the leather pattern using J (Fig. 2). Now work a row in K (Fig. 3). Apply some glue to the paperboard and attach the beaded leather pattern to the cabochon. What we are going to do now is attach the piece of leather to soutache, fixing it along the edge. Firstly attach the beads marked blue * in Figure 3 to the soutache loops. Now note! There is something special about joining the sections, with pendants and bead embroidery: while working along these sections, connect the beaded leather to soutache by strings of three K beads.

    Have a question regarding this project? Email Customer Service.

    Copyright Permissions

    Permission to copy this instruction sheet is granted for non-commercial educational purposes only. All other reproduction requires written permission. Please email copyrightpermission@firemtn.com for more information.

    All products sold by Fire Mountain Gems and Beads® are not intended for use by children 14 years of age and under.

    Fire Mountain Gems and Beads, Inc. - One Fire Mountain Way, Grants Pass, OR USA 97526-2373
    Copyright 2008-2014 Fire Mountain Gems and Beads, Inc. All rights reserved.