Close
Home
Dutch Auction Sale - Now 50% Off
Free Beading Instructions


 Single-Strand Necklace and Earring Set with Swarovski Crystal Components and Antiqued Gold-Plated Steel Components and Focals 

Single-Strand Necklace and Earring Set with Swarovski Crystal Components and Antiqued Gold-Plated Steel Components and Focals
Design Idea BA05 Add to Favorites

-- Designer --

Marlynn McNutt, Exclusively for Fire Mountain Gems and Beads®

To learn more about Marlynn McNutt, read her jewelry artist success story here
Instructions by Maura Buckner, Exclusively for Fire Mountain Gems and Beads®

: : : Materials : : :

  • Component, Swarovski crystal, crystal red magma, 14x14mm square ring (2 components)
  • Component, Swarovski crystal, crystal red magma, 20x20mm square ring (4 components)
  • Component, Swarovski crystal, crystal red magma, 20mm cosmic ring (4 components)
  • Component, Swarovski crystal, crystal red magma, 22x16mm cosmic oval fancy stone (4 components)
  • Component, antiqued gold-plated steel, 12mm double-sided hammered open flat round (2 components)
  • Component, antiqued gold-plated steel, 16mm double-sided hammered open flat round (8 components)
  • Component, antiqued gold-plated steel, 20mm double-sided hammered open flat round (2 components)
  • Component, antiqued gold-plated steel, 25mm double-sided hammered open flat round (3 components)
  • Component, antiqued gold-plated steel, 12x12mm double-sided hammered open flat square (4 components)
  • Component, antiqued gold-plated steel, 16x16mm double-sided hammered open flat square (8 components)
  • Component, antiqued gold-plated steel, 20x20mm double-sided hammered open flat square (6 components)
  • Component, antiqued gold-plated steel, 14x10mm double-sided hammered open flat oval (4 components)
  • Component, antiqued gold-plated steel, 18x13mm double-sided hammered open flat oval (9 components)
  • Focal, antiqued gold-plated steel, 30mm double-sided hammered open flat round (5 focals)
  • Focal, antiqued gold-plated steel, 30x20mm double-sided hammered open flat oval (4 focals)
  • Focal, antiqued gold-plated steel, 40x30mm double-sided hammered open flat oval (4 focals)
  • Focal, antiqued gold-plated steel, 30x30mm double-sided hammered open flat square (4 focals)
  • Jumpring, gold-plated, 6mm round, 18 gauge (82 jumprings)
  • Jumpring, gold-plated, 10mm round, 18 gauge (56 jumprings)
  • Clasp, 2-strand toggle, antiqued gold-plated pewter, 16mm round (1 clasp)
  • Earwire, gold-plated brass, 17mm fishhook with 2mm ball, 22 gauge (2 earwires)
  • Pliers, chain-nose 
  • Pliers, flat-nose 
  • End of Materials List

    Necklace

    Step 1
    Using a pair of chain-nose pliers and a pair of flat-nose pliers, open a 6mm jumpring. Pass it through the first loop on the toggle ring portion of the clasp and a gold-plated 14x10mm oval component. Close the jumpring. Pass a 6mm jumpring through the second loop on the toggle ring portion of the clasp and the gold-plated 14x10mm oval component. Close the jumpring.
    Step 2
    Open a 6mm jumpring. Pass it through the previous gold-plated 14x10mm oval component and a gold-plated 16x16mm square component. Close the jumpring.

    Open a 6mm jumpring. Pass it through the previous gold-plated 16x16mm square component and gold-plated 30mm round component. Close the jumpring.

    Open a 6mm jumpring. Pass it through the previous gold-plated 30mm round component and a 6mm jumpring. Close the jumpring.
    Step 3
    Open a 10mm jumpring. Pass it through the last 6mm jumpring, one gold-plated 14x10mm oval component, one Swarovski 22x16mm red magma cosmic oval and one gold-plated 14x10mm oval component. Close the jumpring. Repeat to add a second 10mm jumpring next to the first 10mm jumpring.

    Open a 10mm jumpring. Pass it through the gold-plated 14x10mm oval component, the Swarovski 22x16mm red magma cosmic oval, the gold-plated 14x10mm oval component, and a 6mm jumpring. Close the jumpring. Repeat to add a second 10mm jumpring next to the first 10mm jumpring.
    Step 4
    Open a 6mm jumpring. Pass it through the previous 6mm jumpring and one gold-plated 30x30mm square component. Close the jumpring.

    Open a 6mm jumpring. Pass it through the previous 6mm jumpring and the gold-plated 16x16mm square component. Close the jumpring.

    Open a 6mm jumpring. Pass it through the previous gold-plated 16x16mm square component. Close the jumpring.

    Open a 6mm jumpring. Pass it through the previous 6mm jumpring, the gold-plated 30x30mm square component and a 6mm jumpring. Close the jumpring.
    Step 5
    Open a 10mm jumpring. Pass it through the last 6mm jumpring, one gold-plated 16mm square component, one Swarovski 20mm red magma cosmic square ring and one gold-plated 16mm square component. Close the jumpring. Repeat to add a second 10mm jumpring next to the first 10mm jumpring.
    Step 6
    Open a 6mm jumpring. Pass it through the previous 6mm jumpring and one gold-plated 40x30mm oval component. Close the jumpring.

    Open a 6mm jumpring. Pass it through the previous 6mm jumpring and gold-plated 18x13mm oval component. Close the jumpring.

    Open a 6mm jumpring. Pass it through the previous gold-plated 18x13mm oval component. Close the jumpring.

    Open a 6mm jumpring. Pass it through the previous 6mm jumpring, the gold-plated 40x30mm oval component and a 6mm jumpring. Close the jumpring.
    Step 7
    Open a 10mm jumpring. Pass it through the last 6mm jumpring, one gold-plated 16mm round component, one Swarovski 20mm red magma cosmic ring and one gold-plated 16mm oval component. Close the jumpring. Repeat to add a second 10mm jumpring next to the first 10mm jumpring.
    Step 8
    Open a 6mm jumpring. Pass it through the previous 6mm jumpring, and one gold-plated 30mm round component. Close the jumpring.

    Open a 6mm jumpring. Pass it through the previous 6mm jumpring and gold-plated 25mm round component. Close the jumpring.

    Open a 6mm jumpring. Pass it through the previous gold-plated 25mm round component. Close the jumpring.

    Open a 6mm jumpring. Pass it through the previous 6mm jumpring, the gold-plated 30mm round component and a 6mm jumpring. Close the jumpring.
    Step 9
    Repeat Steps 3 - 8 three times for a total of four sets leaving off Step 8 on the last set.
    Step 10
    Repeat Step 2 then Step 1 backward to finish the necklace attaching the last gold-plated 14x10mm oval component to the toggle bar portion of the clasp.

    Earrings

    Step 1
    Using a pair of chain-nose pliers and a pair of flat-nose pliers, open the loop on an earwire. Pass it through one gold-plated 14x10mm oval component. Close the jumpring.
    Step 2
    Open a 6mm jumpring. Pass it through the previous gold-plated 14x10mm oval component and a 6mm jumpring. Close the jumpring.
    Step 3
    Open a 10mm jumpring. Pass it through the last 6mm jumpring, one gold-plated 12mm square component, one Swarovski 14mm red magma cosmic square ring and one gold-plated 12mm square component. Close the jumpring. Repeat to add a second 10mm jumpring next to the first 10mm jumpring.
    Step 4
    Open a 6mm jumpring. Pass it through the previous 6mm jumpring and one gold-plated 20mm round component. Close the jumpring.

    Open a 6mm jumpring. Pass it through the previous 6mm jumpring and gold-plated 12mm round component. Close the jumpring.
    Step 5
    Repeat Steps 1 - 4 to create the second earring.
    : : : Additional Resources : : :
  • ''Opening a Jumpring'' how-to video and illustrated instructions
  • End of Additional Resources

    Copyright Permissions

    The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We encourage you to substitute different colors, products and techniques to make the design your own.

    Permission to copy this instruction sheet is granted for non-commercial educational purposes only. All other reproduction requires written permission. Please email copyrightpermission@firemtn.com for more information.


    Have a question regarding this design idea? Email Customer Service.

    Products sold by Fire Mountain Gems and Beads® are intended for experienced jewelry-makers and designer-artists;
    children 14 years of age or younger should use these products with adult direction.

    Fire Mountain Gems and Beads, Inc. - One Fire Mountain Way, Grants Pass, OR USA 97526-2373
    Copyright 2008-2014 Fire Mountain Gems and Beads, Inc. All rights reserved.