Close
Free Pair of SWAROVSKI ELEMENTS 12mm Butterfly Beads with Swarovski Crystal Purchase
Free Beading Instructions


 Double-Strand Necklace and Earring Set with Gold-Finished Brass Focals, Swarovski Crystal Beads and Flat Backs and "Pewter" Angel Wing Beads 

Double-Strand Necklace and Earring Set with Gold-Finished Brass Focals, Swarovski Crystal Beads and Flat Backs and "Pewter" Angel Wing Beads

Necklace

Step 1
Using flush-cutters, cut two single large links of 9x6mm gold-finished Figaro chain. Starting and ending with a small link, cut two 7-inch lengths and four 1-1/2 inch lengths of the same chain.
Step 2
Using E-6000® Jewelry and Craft Adhesive, glue one crystal AB flat back to the center of a 30x30mm gold-finished fancy star focal.

Repeat to create a total of three 30x30mm gold-finished fancy star focals with crystal AB flat back centers.
Step 3
String the following beads and components onto one gold-plated 1-1/2 inch headpin:
  • One 12mm crystal AB Artemis bead
  • One 24x8mm gold-finished wings bead
  • One 6mm crystal AB faceted bicone bead
Using round-nose pliers, flat-nose pliers and flush-cutters, form a simple loop on the straight end of the headpin creating an Artemis gold angel drop.

Repeat to create a second Artemis gold angel drop. Repeat to create one Artemis silver angel drop using silver-plated wings instead of the gold-finished wings.
Step 4
Open one 5.5mm gold-plated jumpring. Pass it through the first link on one 7-inch length of chain and the loop on the toggle ring portion of the clasp. Close the jumpring.
Step 5
Open one 5.5mm gold-plated jumpring. Pass it through the first link on two 1-1/2 inch lengths of chain and the last link on the 7-inch length of chain attached to the toggle ring portion of the clasp. Close the jumpring.
Step 6
Open one 5.5mm gold-plated jumpring and pass it through the last link on one of the 1-1/2 inch length of chain just added and the first point on a 30x30mm gold-finished fancy star focal. Close the jumpring.

Repeat to attach the second 1-1/2 inch length of chain to the third point on the 30x30mm gold-finished fancy star focal.
Step 7
Open one 5.5 mm gold-plated jumpring and pass it through the fifth point on the first fancy star focal and the second point on a second fancy star focal. Close the jumpring.

Repeat Steps 5 - 7 on to finish the toggle bar portion side of the necklace.
Step 8
Open the loop on one Artemis gold angel drop and pass it through the fourth point on the first fancy star focal.

Repeat to add the other Artemis gold angel drop to the sixth point on the third fancy star focal.

Repeat to add the Artemis silver angel drop to the fifth point on the second fancy star focal.

Earrings

Step 1
Using E-6000 adhesive, glue one crystal AB flat back to the center of a 30x30mm gold-finished fancy star focal.

Repeat to create a total of two 30x30mm gold-finished fancy star focals with crystal AB flat back centers.
Step 2
String the following beads and components onto one gold-plated 1-1/2 inch headpin:
  • One 12mm crystal AB Artemis bead
  • One 24x8mm gold-finished wings bead
  • One 6mm crystal AB faceted bicone bead
Using round-nose pliers, flat-nose pliers and flush-cutters, form a simple loop on the straight end of the headpin creating an Artemis gold angel drop.

Repeat to create a second Artemis gold angel drop.
Step 3
Open the loop on one gold-finished fishhook earwire and pass it through the first point on a 30x30mm gold-finished fancy star focals with crystal AB flat back center. Close the loop.
Step 4
Open the loop on one Artemis gold angel drop and pass it through the fifth point on a 30x30mm gold-finished fancy star focal with crystal AB flat back center. Close the loop.

Repeat Steps 3 and 4 to create a second earring.
: : : Additional Resources : : :
  • ''Making a Wrapped Loop and Double-Wrapped Loop'' how-to video and illustrated instructions
  • ''Opening a Jumpring'' how-to video and illustrated instructions
  • End of Additional Resources

    Copyright Permissions

    The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We encourage you to substitute different colors, products and techniques to make the design your own.

    Permission to copy this instruction sheet is granted for non-commercial educational purposes only. All other reproduction requires written permission. Please email copyrightpermission@firemtn.com for more information.


    Have a question regarding this design idea? Email Customer Service.

    All products sold by Fire Mountain Gems and Beads® are not intended for use by children 14 years of age and under.

    Fire Mountain Gems and Beads, Inc. - One Fire Mountain Way, Grants Pass, OR USA 97526-2373
    Copyright 2008-2014 Fire Mountain Gems and Beads, Inc. All rights reserved.