Jump ring maker, steel and acrylic, clear, 4 x 1-1/2 inch base with (3) 3-1/4 inch mandrel rods. Sold per 4-piece set.
Item Number: H20-3972TL
Have a question about this item?
Use this jump ring maker to create your own jump rings in the shape, sizes and metals you want. The jump ring maker works with base and precious metals. Five-piece set includes plastic base and four 3-inch long steel mandrel rods to create 6x4mm, 7x5mm and 8x6mm inside diameter oval jump rings.
To Use:
Step 1: Screw the mandrel of choice into the base.
Step 2: Slip the tool into your pointer finger below the first knuckle, but above the second knuckle.
Step 3: Insert one end of your wire into the hole at the end of the base.
Step 4: Rotate the tool to start wrapping wire around the mandrel rod.
Step 5: Slide the wire off the mandrel rod
Step 6: Hold the coil with coil-cutting pliers and cut a straight line down the coil with a jeweler's saw.
Product-Related Information
Jewelers Tools>Silver Colored>H20-3972TL
Tools>Jewelers Tools
Silver Colored
https://www.firemountaingems.com/itemdetails/h203972tl
H203972TL
Jump ring maker, steel and acrylic, clear, 4 x 1-1/2 inch base with (3) 3-1/4 inch mandrel rods. Sold per 4-piece set.
//image1.fmgstatic.com/images/p3972tlb.jpg
10.35
10.35
As Low As $7.19 per set