Double-Strand Bracelet with Fire Design Cane Glass Beads

STEP 1
Place onto a 1-inch headpin one 7.5x1.5mm sterling silver beaded rondelle and one pink and red glass cane bead. Using a pair of round-nose pliers, chain-nose pliers and side-cutting pliers, finish the end of the headpin with a large simple loop. Repeat to create nine pink glass cane bead drops.

Repeat to create the following, using a 1-inch headpin for each:
  • Nine purple glass cane bead drops, using one 7.5x1.5mm sterling silver beaded rondelle and one purple glass cane bead
  • Ten pink and black glass cane bead drops, using one 7.5x1.5mm sterling silver beaded rondelle and one pink and black glass cane bead
  • Twelve pastel glass cane bead drops, using one 7.5x1.5mm sterling silver beaded rondelle and one pastel glass cane bead
  • Eight aqua and brown glass cane bead drops, using one 7.5x1.5mm sterling silver beaded rondelle and one aqua and brown glass cane bead
STEP 2
Using a pair of chain-nose pliers and flat-nose pliers, open a 6mm jumpring. Pass the open jumpring through the first loop on the circle half of the clasp. Close the jumpring. Repeat to attach a second jumpring to the first loop on the clasp.
STEP 3
Open a 6mm jumpring. Pass the jumpring through both jumprings attached in Step 2. Repeat to attach another 6mm jumpring to both jumprings.

Repeat to create a chain, using two jumprings per link, until the chain is 50 sets of jumprings long.
STEP 4
Open one 6mm jumpring. Pass it through the last set of jumprings. Close the jumpring.
STEP 5
Open one 6mm jumpring. Pass it through the single 6mm jumpring from Step 4 and the first loop on the toggle bar half of the clasp. Close the jumpring.
STEP 6
Repeat Steps 2 - 5 to create a second chain connecting the second loop on one half of the clasp to the toggle bar half of the clasp.
STEP 7
Using chain-nose pliers, open the loop on top of the bead drops, to attach each one to every other set of links on the chain in a random pattern.
STEP 8
Open a 7.3mm jumpring. Pass the jumpring through a heart slide and the 9th link on the first layer of chain. Repeat to attach a heart pendant to the 40th link on the second layer chain.
STEP 9
Open a 7.3mm jumpring. Pass the jumpring through a key charm and the 19th link on the first layer of chain. Repeat to attach a key charm to the 29th and 43rd link on the first layer of chain and the 19th and 31st link on the second layer of chain.

: : : Additional Resources : : :

The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We encourage you to substitute different colors, products and techniques to make the design your own.

Have a question regarding this design idea? Email Customer Service.

Recommended Just for You