Double-Strand Necklace, Bracelet and Earring Set with Terra Rosa Jasper Gemstone Beads, Antiqued Bone Beads and Antiqued Brass-Plated Drops and Focals

Necklace

STEP 1
Using flush-cutters, cut one 6-inch and two 12-inch lengths of bronze 24-gauge round wire and eight 7-inch lengths of antiqued brass-plated 5x3mm twisted cable chain.
STEP 2
Match up the loops on the two antiqued brass-plated v-shaped focal pieces in opposite directions to create a circular focal component. Using a pair of round-nose and chain-nose-pliers, wrap a 6-inch length of wire through both top holes for three wraps to secure the top of the two antiqued brass-plated v-shaped focal pieces together.

String one terra rosa jasper nugget, one bone skull bead and one terra rosa jasper nugget onto the wire.

Position the beads in the center of the two antiqued brass-plated v-shaped focal pieces. Wrap the end of the 6-inch length of wire through both bottom holes for three wraps to secure the bottom of the two antiqued brass-plated v-shaped focal pieces together.
STEP 3
Wrap a 12-inch length of wire through the top outside loop on the right antiqued brass-plated v-shaped focal piece for three wraps to secure it on the loop.

String one 6mm round terra rosa jasper bead onto the wire. Pass the wire from the front to back of the second loop. Continue to attach a one 6mm round terra rosa jasper bead in between each loop on the outside of the right antiqued brass-plated v-shaped focal piece for a total of eight beads. Wrap the wire through the last loop for three wraps to secure it in place.

Repeat to attach eight 6mm round terra rosa jasper beads to the left antiqued brass-plated v-shaped focal piece.
STEP 4
Using a pair of chain-nose pliers and flat-nose pliers, open a 5mm jumpring. Pass it through the loop on the toggle bar portion of the clasp. Close the jumpring. Repeat to attach a second 5mm jumpring next to the first to create a double jumpring.

Open a 5mm jumpring. Pass it through the 5mm double jumpring and the first link on four 7-inch lengths of chain. Close the jumpring. Repeat to attach a second 5mm jumpring next to the first to create a double jumpring.

Open a 5mm jumpring. Attach it to the last link on two of the 7-inch lengths of chain. Repeat to attach a single 5mm jumpring to the last link on the remaining two lengths of chain.

Repeat Step 4 to attach four 7-inch lengths of chain to the toggle bar portion of the clasp.
STEP 5
Open a 5mm jumpring. Pass it through the top loop on the focal piece created in Step 3. Repeat to attach a second 5mm jumpring next to the first to create a double jumpring.

Repeat to attach a 5mm double jumpring to the bottom loop on the focal piece.
STEP 6
Using the flush-cutters, cut one 5-inch length of Accu-Flex professional-quality beading wire. String onto the wire one crimp bead and the 5mm jumpring on the last link of the first set of 7-inch length of chain attached to the toggle ring portion of the clasp. Pass the wire back through the crimp bead leaving one end of the wire approximately 1-inch long. Pull the crimp tight against the jumpring. Place a small amount of adhesive (Loctite) inside the crimp (optional).

Using crimping pliers, crimp the crimp bead. Using flush-cutters, trim the excess wire from the short end.

Place a crimp cover over the crimp bead then gently close it.
STEP 7
String onto the beading wire eight 10mm round terra rosa jasper beads.
STEP 8
String on one crimp bead and one of the 5mm jumprings on top of the focal piece. Pass the wire back through the crimp bead, pulling the wire tight against the last bead. Make sure there is no slack along the length of the necklace. Place a small amount of adhesive inside the crimp (optional).

Using the crimping pliers, crimp the crimp bead. Using flush-cutters, trim excess wire from the end.

Place a crimp cover over the crimp bead then gently close it.
STEP 9
Repeat Step 6 to attach a 5-inch length of beading wire to the jumpring attached to the second set of 7-inch length of chains attached to the toggle ring portion of the clasp.
STEP 10
String onto the beading wire ten 8mm round terra rosa jasper beads.
STEP 11
Repeat Step 8 to attach the wire to the other 5mm jumpring on the top of the focal piece.
STEP 12
Repeat Step 6 to attach a 15-inch length of beading wire to the jumpring attached to the first set of 7-inch length of chain attached to the toggle-bar portion of the clasp.
STEP 13
String onto the beading wire thirty-two 10mm round terra rosa jasper beads.
STEP 14
Repeat Step 8 to attach the wire to one of the 5mm jumprings on the bottom of the focal piece.
STEP 15
Repeat Step 6 to attach a 15-inch length of beading wire to the jumpring attached to the second set of 7-inch length of chains attached to the toggle-bar portion of the clasp.
STEP 16
String onto the beading wire thirty-six 8mm round terra rosa jasper beads.
STEP 17
Repeat Step 8 to attach the wire to the other 5mm jumpring on bottom of the focal piece.

Bracelet

STEP 1
Using a pair of chain-nose pliers and flat-nose pliers, open a 5mm jumpring. Pass it through the loop on the toggle bar portion of the clasp. Close the jumpring. Repeat to attach a second 5mm jumpring next to the first to create a double jumpring.

Open a 5mm jumpring. Pass it through the first set of 5mm double jumprings. Repeat to attach a second 5mm jumpring next to the first.

Open a 5mm jumpring. Pass it through the last set of 5mm double jumprings. Close the jumpring. Repeat to attach a second 5mm jumpring next to the first for a total of three sets of double jumprings.

Open a 5mm jumpring. Pass it through the loop on the toggle loop portion of the clasp. Close the jumpring. Repeat to attach a second 5mm jumpring next to the first to create a double jumpring.
STEP 2
Using the flush-cutters, cut one 8-inch length of Accu-Flex beading wire. String onto the wire one crimp bead and the last set of 5mm double jumprings attached to the toggle-loop portion of the clasp. Pass the wire back through the crimp bead, leaving one end of the wire approximately 1-inch long. Pull the crimp tight against the jumpring. Place a small amount of adhesive (Loctite) inside the crimp (optional).

Using the crimping pliers, crimp the crimp bead. Using flush-cutters, trim the excess wire from the short end.

Place a crimp cover over the crimp bead then gently close it.
STEP 3
String onto the beading wire one 25x18mm teardrop terra rosa jasper bead and one #8 iris dark bronze seed bead.

Repeat twelve times for a total of thirteen sets ending with a 25x18mm teardrop terra rosa jasper bead.
STEP 4
String on one crimp bead and the last set of 5mm double jumprings attached to the toggle bar portion of the clasp. Pass the wire back through the crimp bead, pulling the wire tight against the last bead. Make sure there is no slack along the length of the bracelet. Place a small amount of adhesive inside the crimp (optional).

Using the crimping pliers, crimp the crimp bead. Using flush-cutters, trim excess wire from the end.

Place a crimp cover over the crimp bead then gently close it.

Earrings

STEP 1
String one 20x14mm bone skull bead onto a 1-inch eyepin. Using a pair of chain-nose pliers, round-nose pliers and flush-cutters, form a simple loop on the straight end of the wire, creating a skull beading link. Repeat to create two skull beading links.

Repeat to create two terra rosa jasper nugget beading links using one terra rosa jasper nugget and one 1-inch eyepin.
STEP 2
Using a pair of chain-nose pliers and flat-nose pliers, open the loop on one side of a terra rosa jasper nugget beading link. Pass the loop through the loop on an earwire. Close the loop.

Open the bottom loop on the terra rosa jasper nugget beading link. Pass it through the top loop on a skull beading link. Close the loop.

Open the opposite loop on the skull beading link. Pass it though the loop on an antiqued brass-plated teardrop. Close the loop.
STEP 3
Repeat Step 2 to create the second earring.

: : : Additional Resources : : :

The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We encourage you to substitute different colors, products and techniques to make the design your own.

Have a question regarding this design idea? Email Customer Service.

Recommended Just for You