Single-Strand Necklace and Earring Set with Swarovski Crystal and Silver-Plated Brass Beads and Drops

For more inspiration, read this informative article ...

Right in line with the 2013 Pantone color of the year, this emerald jewelry set is sparkly, fun, easy to wear and universally flattering. Channeling famous emerald lovers, such as...

Necklace

STEP 1
Using a pair of chain-nose pliers and bent-nose pliers open the loop on one silver-plated brass 1-inch eyepin. Attach one Swarovski emerald 8x8mm diamond drop. Close the loop.

String onto the straight end of the eyepin one Swarovski and silver-plated brass crystal AB 4x2mm rondelle and one Swarovski crystal AB 4.5mm simplicity bead. Using a pair of chain-nose pliers, round-nose pliers and flush-cutters form a simple loop on the straight end of the eyepin creating a Swarovski emerald diamond and 4.5mm simplicity drop.

Repeat to create a total of thirteen Swarovski emerald diamond and crystal AB simplicity drops.
STEP 2
Using a pair of chain-nose pliers open the loop on one Swarovski emerald diamond and crystal AB simplicity drop and pass it through one link in the chain.

Approximately 7-1/2 inches from the beginning of the 36-inch length of silver-finished brass 2mm cable chain, not including the chain extender.
STEP 3
Continuing from the Swarovski emerald diamond and crystal AB simplicity drop, attach the following components to every fifth link on the chain using one silver-plated 4mm jumpring:
  • One Swarovski crystal clear 4mm round drop
  • One Swarovski and sterling silver crystal AB 6x6mm flower drop
  • One Swarovski crystal clear 4mm round drop
  • One Swarovski emerald diamond and crystal AB simplicity drop
STEP 4
Continue attaching components to every fifth link in the chain, repeating the pattern in Step 3 a total of twelve times.

Earrings

STEP 1
Using a pair of chain-nose pliers and bent-nose pliers open the loop on one silver-plated brass 1-inch eyepin. Attach one Swarovski emerald 8x8mm diamond. Close the loop.
STEP 2
String onto the straight end of the eyepin one Swarovski and silver-plated brass crystal AB 4x2mm rondelle and one Swarovski crystal AB 4.5mm simplicity.

Using a pair of chain-nose pliers and bent-nose pliers form a simple loop on the straight end of the eyepin.
STEP 3
Using a pair of chain-nose pliers open the loop on one silver-plated 17mm leverback earwire. Attach the simple loop from Step 2. Close the loop.
STEP 4
Repeat Steps 1 - 4 to create a second earring.

: : : Additional Resources : : :

The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We encourage you to substitute different colors, products and techniques to make the design your own.

Have a question regarding this design idea? Email Customer Service.

Recommended Just for You