Get inspired by Swarovski design team's limitless imagination. Magical project ideas bring a new dimension to simple techniques.
Cut off 30cm of the 1mm wire using a side-cutter. Bend wire at a right angle and form a loop using the round-nose pliers. Cut off excess. Bend wire using flat-nose pliers as shown in illustration in order to get the desired shape. Insert wire into the loop.
Bend wire to right angle and form a big loop using the round-nose pliers. Cut off excess.
Cut off 25cm of the 0.4mm wire using side-cutter. Bend it around trousers and twist it twice. Slide on several XILION beads article 5328 from the Swarovski crystal assortment as shown in illustration.
Wrap ends around trousers, twisting one end to the right and one to the left.
Repeat step 3 nine times until getting design composition using the Swarovski crystal shown in illustration. Cut off excess as shown.
Cut off 50cm of the 0.4mm wire using side-cutter. Bend it around trousers as shown in illustration so that you have one shorter end which is about 10cm and one longer end with about 40cm. Do not cut excess off. Repeat steps 3 - 4 for sliding on Swarovski crystal and fixing end by wrapping wire ends around. Wrap longer end all along side length of trousers. Repeat this step for left side as shown.
Cut 100cm of 0.4mm wire and wrap one wire end on left side and one on right side all around trousers as shown in illustration.
Open the loop using flat-nose pliers. Insert loop into chain and close loop.
Permission to copy this instruction sheet is granted for non-commercial educational purposes only. All other reproduction
requires written permission. Please email firstname.lastname@example.org
for more information.