Bracelet with Swarovski Crystal
Denim Blue Heart Link Bracelet
Get inspired by Swarovski design team's limitless imagination. Magical project ideas bring a new dimension to simple techniques.
: : : Materials : : :
- Bead, Swarovski crystal, dark indigo, 4mm bicone (10 beads)
- Bead, Swarovski crystal, denim blue, 8mm round (10 beads)
- Drop, Swarovski crystal, denim blue, 18x18mm Xilion heart pendant (1 drop)
Jumpring, TierraCast, 8mm open (2 jumprings)
Clasp, toggle, TierraCast, lock and key (1 clasp)
Wire, dead soft, 20 gauge
- Clasps, toggle
- Please take the creative opportunity to substitute the TierraCast findings shown above with alternative items offered at Fire Mountain Gems and Beads.
Using 20 gauge wire cut (5) one inch pieces of wire and (5) 1-1/2 inch pieces of wire.
Using (1) one inch piece of wire, bend wire at a right angle 10mm from the end of the wire. Turn a simple loop. Add on (1) Swarovski bead art. 5000 8mm denim blue. Make a bend at a right angle over the Swarovski bead and turn a simple loop. Repeat four times more. Set aside.
Using (1) one and one half inch piece of wire, bend wire at a right angle 10mm from the end of the wire. Turn a simple loop. Add on (1) Swarovski bead art. 5328 4mm dark indigo, (1) Swarovski bead art. 5000 8mm denim blue and (1) Swarovski bead art. 5328 4mm dark indigo. Make a bend at a right angle over the Swarovski bead art. 5328 4mm dark indigo. (Note: be careful not to chip the top of the Swarovski Bead with your tool.) If necessary trim wire to 10mm in length. Turn a simple loop. Repeat four times more.
Open one side of a Step 3 link and attach to the key portion of the toggle clasp.
Open one side of a Step 2 link and attach to the unit created in Step 4.
Open one side of a Step 3 link and attach to the unit created in Step 5. Repeat, rotating between a Step 2 link and a Step 3 link, until all the links are chained together.
Open one size 8 jumpring and attach to Swarovski xilion heart pendant art. 6228. Close jumpring.
Open one size 8 jumpring and attach to jumpring from Step 7, open end of chain links and heart side of toggle clasp. Close jumpring.
Have a question regarding this project?
Email Customer Service.
Permission to copy this instruction sheet is granted for non-commercial educational purposes only. All other reproduction
requires written permission. Please email email@example.com
for more information.