Jump ring maker, steel and plastic, clear, 3-1/2 x 1-1/2 inch base and (4) 3-1/4 inch mandrel rods. Sold per 5-piece set.
Item Number: H20-3751TL
Have a question about this item?
Use this jump ring maker to create your own jump rings in the sizes and metals you want. The jump ring maker works with base and precious metals. Five-piece set includes plastic base and four 3-inch long steel mandrel rods to create jump rings with 10mm, 12mm, 14mm and 16mm inside diameters.
To Use:
Step 1: Screw the mandrel of choice into the base.
Step 2: Slip the tool into your pointer finger below the first knuckle, but above the second knuckle.
Step 3: Insert one end of your wire into the hole at the end of the base.
Step 4: Rotate the tool to start wrapping wire around the mandrel rod.
Step 5: Slide the wire off the mandrel rod
Step 6: Hold the coil with coil-cutting pliers and cut a straight line down the coil with a jeweler's saw.
Product-Related Information
Mandrels>Steel>Silver Colored
Tools>Jewelers Tools>Mandrels
Steel
Silver Colored
https://www.firemountaingems.com/itemdetails/h203751tl
H203751TL
Jump ring maker, steel and plastic, clear, 3-1/2 x 1-1/2 inch base and (4) 3-1/4 inch mandrel rods. Sold per 5-piece set.
//image1.fmgstatic.com/images/p3751tlb(4).jpg
14.29
14.29
As Low As $2.62 per set