Single-Strand Necklace made of Three Bracelets with Rubberized Acrylic Beads, Czech Glass Beads and Chain

Bracelet A

STEP 1
Onto a 1-1/2 inch headpin, thread a 5mm bead cap, an 18mm orange rubber bead and another bead cap. Using round-nose pliers, chain-nose pliers and flush-cutters, finish the end of the headpin with a simple loop to create an 18mm orange round rubber bead drop.

Repeat to create a total of six 18mm orange round rubber bead drops.

Repeat to create five 10mm orange round rubber bead drops, two fuchsia oval rubber bead drops, two fuchsia diamond rubber bead drops and one 18mm fuchsia round rubber bead drop.

Place onto a 1-1/2 inch headpin one Czech lemon yellow faceted round glass bead. Finish the end of the headpin with a simple loop to create a lemon-yellow faceted round glass bead drop. Repeat to create a total of six.
STEP 2
Using a pair of flush-cutters one 7-1/2 inch length of gunmetal aluminum chain and one 7-1/2 inch length of silver-plated ball chain.
STEP 3
Using a pair of chain-nose pliers and flat-nose pliers, open a 6mm jumpring. Pass the open ring through the loop on one 18mm orange round rubber bead drop and a link on the gunmetal chain. Close the jumpring.

Repeat to attach a fuchsia rubber oval bead drop 1/2 inch down the length of gunmetal chain.

Attach alternating 18mm orange round rubber bead drops and fuchsia rubber bead drops at 1/2 inch intervals down the length of the gunmetal chain.
STEP 4
Using flush-cutters, clip the loop on one side of a bead tip connector and, with a pair of chain-nose pliers, twist it open slightly.
Rest one end of the ball chain in the bead tip cup with ball chain bar between the clipped and unclipped bead tip connectors. Using chain-nose pliers, gently squeeze the bead tip closed over the ball chain.

Repeat on other side of ball chain.
STEP 5
Onto a 3/4 inch silver-plated eyepin, thread on a lime-lined triangle glass seed bead. Finish the end of the eyepin with a simple loop to create a triangle seed bead link.

Repeat for a total of 24 triangle seed bead links.
Using a pair of chain-nose pliers, open a loop on one end of one triangle seed bead link and thread it through the loop of another link. Close the loop.

Repeat to connect all seed bead links, creating a 7-1/2 inch chain of beaded links.

Open a 6mm jumpring, pass the open ring through a loop on one 10mm orange round rubber bead drop and the third loop from the end of the seed bead link chain. Close the jumpring.

Repeat to attach a Czech lemon yellow faceted bead drop onto the seed bead link chain 1/2 inch down from the orange rubber bead drop.
Repeat to attach the remaining orange rubber and Czech lemon yellow bead drops, alternating each every 1/2 inch of seed bead link chain.
STEP 6
Open an 8mm jumpring and pass it through the last link of gunmetal aluminum chain, the last loop on the seed bead link chain, and the bead tip loop connected to the ball chain and the loop of the silver-plated toggle clasp bar. Close the jumpring.

To finish, open a 6mm jumpring and pass it through the last link of the seed beaded chain and through the toggle ring loop, close it. Repeat using a 4mm jumpring with bead tipped ball chain and an 8mm jumpring on the aluminum chain.

Bracelet B

STEP 1
Onto one 1-1/2 inch headpin, thread on a bead cap, a 10mm orange rubber bead and another bead cap. Finish the end of the headpin with a simple loop to create a 10mm orange round rubber bead drop.

Onto a 3/4 inch eyepin, thread on a bead cap, a fuchsia oval tube rubber bead and a bead cap. Finish the end of the eyepin with a simple loop to create a rubber bead link.

Onto a 3/4 inch eyepin, thread on a sterling silver rondelle, a Czech lemon yellow faceted glass round and a sterling silver rondelle. Finish the end with a simple loop to create a Czech lemon yellow beaded link.

Onto a 3/4 inch eyepin, thread on a lime-lined seed bead. Finish the end with a simple loop to create a lime-lined seed bead link.
STEP 2
Using flush-cutters, cut an 11-link length of aluminum chain.
STEP 3
Open a 4mm jumpring. Pass the open ring through the loop on a lobster claw clasp and a loop on one end of the fuchsia bead link. Close the jumpring.

Using chain-nose pliers, open one loop of the fuchsia bead link and pass it through a loop on the Czech lemon yellow bead link. Close the loop. Open the other loop on the lemon yellow bead link and pass it through a loop on a lime-lined seed bead link. Close the loop.

Open a 6mm jumpring and pass it through the loop on one end of the bead chain just created and the loop on one end of the aluminum chain. Close the jumpring.

Repeat to attach the orange bead drop to the last link on the other end of the aluminum chain. Close the jumpring.

Bracelet C

STEP 1
Measure and cut a 3-1/2 inch length of gunmetal aluminum chain. Using a 6mm jumpring, attach a lobster claw clasp to one end.
STEP 2
Onto a 3/4 inch eyepin, thread on a sterling silver half-round bead cap, an orange diamond rubber bead and a half-round bead cap. Finish the end with a simple loop to create an orange diamond rubber bead link. Repeat to create a total of two.
STEP 3
Onto a 3/4 inch eyepin, thread on a sterling silver rondelle, a silver wonder bead and a sterling silver rondelle. Finish the end with a simple loop to create a wonder bead link. Repeat to create a total of three.

Open the loop of an orange diamond beaded link and connect it to a loop on a wonder bead link. Attach two more wonder bead links and then the last orange bead link.
STEP 4
Using a 4mm jumpring, attach the ring portion of the toggle clasp to the last orange bead link in the beaded chain. Using a 4mm jumping, attach the gunmetal aluminum chain to the second orange bead link on the other side.

: : : Additional Resources : : :

The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We encourage you to substitute different colors, products and techniques to make the design your own.

Have a question regarding this design idea? Email Customer Service.

Recommended Just for You