Double-Strand Necklace and Earring Set with Copper-Finished Brass Drops and Focal and Swarovski Crystal

Necklace

STEP 1
Using a pair of chain-nose pliers and flat-nose pliers, open the jumpring on the first end of the 36-inch length of antiqued copper-finished 3mm cable chain. Remove the jumpring and clasp from the chain. Repeat to remove the jumpring from the opposite end of the chain. Set clasp aside for use in the finished design.

Using flush-cutters cut two 18-inch lengths of antiqued copper-finished 3mm cable chain.
STEP 2
Place one Swarovski amethyst 30x22mm faceted oval embellishment into the copper-finished 30x22mm oval bezel.
STEP 3
Starting on the back of the stone, use the bezel roller to gently push the bezel prongs down over the embellishment. Turn the mounting over to the front and repeat to gently push the bezel prongs down over the front of the embellishment.
STEP 4
Use the bezel pusher to push the tips of each prong securely in place on the front and back of the embellishment.

Using the tip portion of the crimping pliers jaw, gently squeeze each front and back prong together.
STEP 5
Pass the hook on the end of the bail through the front of the loop on the top of the bezel set stone. Use a pair of chain-nose pliers to close the bail.
STEP 6
Using a pair of chain-nose pliers and flat-nose pliers, open a 5mm jumpring. Pass it through the first link on two18-inch lengths of antiqued copper-finished 3mm cable chain. Close the jumpring.

Pass the opposite end of both lengths of chain through the bail on the bezel-set embellishment.

Repeat to attach the second 5mm jumpring to the last link on the two 18-inch lengths of chain.
STEP 7
To terminate the necklace, attach jumprings together using the clasp from Step 1.

Earrings

STEP 1
Place one Swarovski amethyst 25x18mm faceted oval embellishment into the copper-finished 25x18mm oval bezel.
STEP 2
Starting on the back of the mounting, use the bezel roller to gently push the bezel prongs down over the embellishment. Turn the mounting over to the front and repeat to gently push the bezel prongs down over the front of the embellishment.
STEP 3
Use the bezel pusher to push the tips of each prong securely in place on the front and back of the embellishment.

Using the tip portion of the crimping pliers jaw, gently squeeze each front and back prong together.
STEP 4
Pass the hook on the end of bail through the front of the loop on the top of the bezel-set embellishment. Use a pair of chain-nose pliers to close the bail.
STEP 5
Using a pair of chain-nose pliers and flat-nose pliers, open an 8mm jumpring. Pass it through the bail on the bezel-set embellishment and the loop on an earwire. Close the jumpring.
STEP 6
Repeat Steps 1 - 5 to create the second earring.

: : : Additional Resources : : :

The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We encourage you to substitute different colors, products and techniques to make the design your own.

Have a question regarding this design idea? Email Customer Service.

Recommended Just for You