Single-Strand Necklace and Earring Set with Swarovski Crystal

Necklace

STEP 1
Using flush-cutters, cut one 31-inch length of silver-finished 6mm figaro chain.
STEP 2
String one Swarovski crystal AB 8mm star bead onto a headpin. Using a pair of chain-nose pliers, round-nose pliers and flush-cutters, form a simple loop on the straight end of the wire. Repeat to create fifteen Swarovski crystal AB 8mm star bead drops.
STEP 3
Using a pair of chain-nose pliers and flat-nose pliers, open one 6mm jumpring. Pass it though the first link on the 31-inch length chain and the loop on the lobster claw clasp. Close the jumpring.

Repeat to attach one 6mm jumpring to the last link on the 31-inch length of chain.
STEP 4
Open one 5mm jumpring. Pass it through the loop on one Swarovski crystal AB 8mm star bead drop and the 16th 9x6mm link on the 31-inch length of chain. Close the jumpring.

Repeat to attach one Swarovski crystal AB 8mm star bead drop to the 20th, 24th, 28th, 32nd, 36th, 40th, 44th, 48th, 52nd, 56th and 60th links.

Repeat to attach one Swarovski crystal red magma 14mm cosmic pendant using one 7mm jumpring to the 22nd, 26th, 30th, 34th, 38th, 46th, 50th, 54th, 58th and 62nd links.
STEP 5
Open one 5mm jumpring. Pass it through the loop on one Swarovski crystal AB 8mm star bead drop. Repeat to attach one 5mm jumpring to three Swarovski crystal AB 8mm star bead drops.

Open one 7mm jumpring. Pass it through the 5mm jumpring attached to three Swarovski crystal AB 8mm star bead drops and the 45th link on the 31-inch length of chain. Close the jumpring.
STEP 6
Pass one 13.5x3mm bail over the 46th link on the 31-inch length of chain. Fit the picks through the hole on one Swarovski crystal red magma 40mm cosmic pendant, then using chain-nose pliers pinch the legs of the bail together. Press firmly so pendant is held securely.

Earrings

STEP 1
Using a pair of chain-nose pliers and flat-nose pliers, open one 7mm jumpring. Pass it though the hole on one Swarovski crystal red magma 14mm cosmic pendant. Close the jumpring.

Open one 5mm jumpring. Pass it through the loop one earwire and the 7mm jumpring attached to the Swarovski crystal red magma 14mm cosmic pendant.
STEP 2
Pass one Swarovski crystal AB 8mm star bead onto the straight end of the earwire. Pass it over the wire and position it above the loop on the front of the earring.
STEP 3
Repeat Steps 1 and 2 to create the second earring.

: : : Additional Resources : : :

The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We encourage you to substitute different colors, products and techniques to make the design your own.

Have a question regarding this design idea? Email Customer Service.

Recommended Just for You