Making a Butterfly CaneB469
The cane shown in these instructions is the Monarch butterfly. However, you can get very creative with colors and patterns, making fantasy butterflies of all colors and shapes. The instructions will show how to make one wing of the butterfly; cutting another wing off the cane and flipping it will create a mirror image for the second wing of the butterfly.
|Using the Poly-Roller machine, condition three blocks of red and three blocks of yellow Kato polymer clay. Make a Skinner Blend gradient.
Using the Poly-Roller, turn the gradient into a 4-inch wide strip of clay. Keep running the strip through the Poly-Roller until it is down to the #5 setting. When the clay is thin, the gradient colors will transition well in the cane.
Fold the gradient clay back and forth onto itself. It does not matter which color you begin with.
|Using your hands, shape the block into a log shape.|
Tip: Canes that are irregularly shaped, meaning they are not a circle, square or triangle, lose their shape when they are reduced in size. You want to make this cane close to the size that you will be using it, unless you don't mind that it will change shape as you reduce. This means that if you want to make earrings, make fairly small pieces in these next steps, but if you plan to use the cane in the Jungle Crown or in a home décor project, use larger pieces.
|Using your hands, squeeze, roll and pull on the cane, this will elongate it and reduce the diameter. Reduce it to the size pieces you want to work with, shape it into a tear drop shape.|
Example: if the cane is 12 inches long, each piece would be 1-inch long. Using the clay blade, cut the cane into eight 1-inch pieces, and two 2-inch pieces.
|Arrange the pieces together in the two patterns shown. Press the clay together to make the pieces adhere to each other.|
|Using your hands, shape the cream clay into a log, cover it with the black clay sheet. Squeeze, roll and pull on the cane, reducing it down to the size spots that will look good on your cane. Make larger and smaller spots.|
|Begin adding the spots around the two pieces from Step 7, use photo as shown as a reference for placing the spots or create your own pattern.
Once the spots are everywhere that you want them, wrap each piece with black sheet clay. If the two pieces put together will make a cane larger than you want it, this is a good time to reduce each piece, hold its original shape as much as possible. Press the two pieces together to create a wing. Leave the cane the size it is, or, if you reduce it, try to keep its shape. Cut two pieces from your cane, you now have the two mirror sides of the butterfly wings.
: : : Additional Resources : : :
Have a question regarding this project? Email Customer Service.
Permission to copy this instruction sheet is granted for non-commercial educational purposes only. All other reproduction requires written permission. Please email email@example.com for more information.