Resource Center Search

Results for: kwjmmetalvid

6 Resource(s) Found
1 of 1

Results Per Page: 20 50 100

Eurotool® Punch

In this jewelry-making tool show-and-tell, see all the benefits of the EUROTOOL® spring-loaded steel punch with adjustable force, which marks drill spots by creating a divot so you can drill or punch holes without slipping and potentially damaging...

Sawing Metal

When using a jeweler's saw and saw blade, avoid pushing the blade against the metal being cut; it will catch and snag, possibly breaking the blade. Using a gentle up and down motion, let the teeth of the saw blade do the work of cutting the metal.

Finishing Metal After Sawing

You've cut out a piece of metal for use in jewelry, but the edges are rough. Follow the tips in this how-to video for filing your metal piece to create a professional finish.

How to Solder a Jumpring with Solder Paste

Soldering jumprings closed helps create a secure connection in jewelry. It's easier to solder than you may think. Follow along with Chris as he walks you through the tools and steps needed for this handy skill.

Riveting With a Wire Rivet

Riveting is a cold-joining process, bringing two pieces of something, in this case metal, together. A wire rivet is formed into a nail-like head on each end, with the layers to be joined sandwiched in between then held in place.

Riveting With a Tube or Crimp Tube

Riveting is a cold-joining process, bringing two pieces of something, in this case metal, together. This type of rivet is like a grommet where the flared ends hold the layers together and the tube forms a hole that passes through all the layers....
6 Resource(s) Found
1 of 1

Results Per Page: 20 50 100