Results for: kwjmtlsvid

78 Resource(s) Found
Page 1 of 4

Results Per Page 20 | 50 | 100

Weighing with Digital Scales

Digital scales are great to use when your pattern calls for a specific measurement in weight.

How to Use Magnifiers

Magnetic Rack

Alice Gershowitz, in-house jewelry designer, explains how the multipurpose magnetic rack for jewelry-making tools will make your design life easier by getting tools up off your workspace.

How to Use the Beadalon® Tying Station

Unscrew the wing nut at the upper part of the tying station. Make a loop with your wire/cord and tie or crimp it.

Maxi Shear Flush-Cutter by EUROTOOL®

You’ll love the Xuron® Maxi-Shear™ flush cutter jewelry pliers for more than just its clean cut on beading wire, and Alice Gershowitz--in-house jewelry designer--explains why in this jewelry-making product show-and-tell.

Xuron® Flush-Cutters

Jude Wroblewski, jewelry designer, explains the benefits of American-made Xuron® deluxe flush-cutters, including their smooth, precise cuts on jewelry wire even in tight spaces.

EUROTOOL® Nylon Jaw Looping Pliers

In-house jewelry designer Jamie Smedley shows the benefit of EUROTOOL® nylon jaw pliers when working with jewelry-making wire you don’t want to mar or scratch.

Using a Jump Ring Tool

This handy tool will make opening a jump ring a snap!

Using Loop-Closing Pliers

Loop-closing pliers are designed to close open rings, like jumprings. The notch in each half of the jaw holds the ring stable during the process.

How to Use Beadalon® MULTIPLIERS™

In this how-to video led by jewelry designer Rose, see why two heads are better than one with these time-saving pliers from Beadalon®.

Using the JoolTool™ to Sand, Buff and Polish Polymer Clay

The Jooltool® does more than polish metal and gemstones; this polishing system can also put the finishing touches on polymer clay creations. See the steps to sand, buff and polish polyclay led by renowned mixed media artist Lisa Pavelka.

Sizing Rings on a Ring Mandrel

If you need to size a ring up within a 0.25 (1/4) to 0.50 (1/2) ring size, and there are no settings with stones in your ring band, then the ring mandrel and a hammer are the tools you need.

Secrets to Using a Bead Knotting Tool

Create pearl knotted jewelry easily with the help of a bead knotting tool called The Bead Knotter™. Tammy Honaman demonstrates how to knot between beads with the use of this jewelry-making tool.

How to Solder a Jumpring with Solder Paste

Soldering jumprings closed helps create a secure connection in jewelry. It's easier to solder than you may think. Follow along with Chris as he walks you through the tools and steps needed for this handy skill.

How to Prepare a Felt Wheel for First-Time Use

See how to mount and prepare the Ninja felt wheel on the Ninja back pad for use on the Jooltool™ to buff, polish and apply compounds (such as jeweler's rouge) to stone or glass for jewelry making.

Using Split Ring Pliers

Split ring pliers make it a snap to use the sometimes challenging split rings. Here are instructions for using split ring pliers:

Tumbling and Polishing Jewelry and Stones with a Tumbler

Unscrew the nut on the top of the barrel. Remove the metal washer. Remove the outer metal lid. If the lid is difficult to remove, insert the washer into the area between the lip of the lid and the barrel and twist to lift the lid away from the...

Using the JoolTool™ to Sand, Buff and Polish Metal Clay

Lisa Pavelka, mixed media artist guru, demonstrates how to sand, buff and polish metal clay jewelry components for a refined and professional finish with the Jooltool™ polishing system.

How to Use a Wire Jig

A wire jig offers you the ability to make great shapes from wire and to make them consistently.

How To Use The EUROTOOL® Stamp Holder

78 Resource(s) Found
Page 1 of 4

Results Per Page 20 | 50 | 100