Results for: loom

185 Resource(s) Found
Page 1 of 10

Results Per Page 20 | 50 | 100

Loom Dimensions Chart

See how much weaving space you have for the range of Mirrix looms available at Fire Mountain Gems and Beads®.

Bead Loom

(also called beading loom) Frame designed to hold multiple strands of thread parallel. A piece of thread strung with seed beads in a predetermined order is run back and forth between every other thread to create a pattern.

Beadalon® Jewel Loom™ Beading Loom Tips

Explore five different beading loom tips specific to the Beadalon® Jewel Loom™, including how to secure the ends of your design, how to add a ribbon clasp and other looming techniques.

Simple Tips

When looming beads, a sharp needle tip can split the threads and tangle. Use the needle eye first so you never split your threads. Or try dulling the needle tip by gently filing it so it doesn't do this.

Bead Weaving, Off-Loom

Weaving techniques adapted to create a flexible "fabric" out of seed beads and thread using a needle and thread.

Bead Weaving, On-Loom

Weaving techniques adapted to create a flexible "fabric" out of seed beads and thread. Seed beads are woven between the warp threads on a Beading Loom to create a design or pattern.

Warping a Loom

Not sure how to warp a loom, also known as setting the threads in a loom for weaving? In-house jewelry designer Rose shows you just how easy it is to get a warped loom in no time. No matter which projects appeal to you the most, from simple...

Warping a Mirrix Loom for Beadwork Without the Shedding Device

Line up the wooden clips 2 to 3 inches from the bottom of the top beam.Note: If your loom has the plastic black clips, you will need to attach them to the back of the loom with the indentations for the warping bar facing the inside.

I am new to loom working, and would like to know how to attach my project to a steel bracelet blank.

Make sure your loomworked project is as close to the same width as the steel bracelet blank you intend to use. (This bracelet shows the loom piece...

Warping a Mirrix Loom for Tapestry

Mirrix Tapestry and Bead Loom

Warping a Mirrix Loom for Beadwork with the Shedding Device

Line up the wooden clips 2 to 3 inches from the bottom of the top beam.Note: If your loom has the plastic black clips, you will need to attach them to the back of the loom with the indentations for the warping bar facing the inside.)

Professional Beading Loom

Although created with Delica beads in mind, any bead size 11/0 to 15/0 can be used with this loom. Additional supplies you may need include masking tape to secure the thread keepers, a small crochet hook, toothpick, or needle for lifting threads...

What should I consider when buying a beading loom?

First, assess the needs of your project. What type of beads will you be using? What are the dimensions of your project? The answers to these...

How to Weave Beads on a Mirrix Loom

See how to weave beads on a Mirrix loom with and without the shedding device in this detailed tutorial courtesy of the manufacturer.

The Knotted Warp Technique - Professional Beading Loom

Cut the thread from the cardboard and lay it carefuly out full length over the top of the loom.

I just made my first off-loom beading bracelet with peyote stitch, and I am having difficulty finishing the ends to add the clasp. Help, please.

In the project '','' a multi-strand clasp is added to the end of a peyote woven strip using the same thread used to create the design. The loops of...

How to Assemble the Beading Loom

Beginner's Guide to Loomwork - Part 1: Selecting a Loom

Part one in a series on loomwork presents the important features of beading looms. Find an informative comparison chart to guide you in selecting the right beading loom for your designs.

The Warp Hub Technique - Professional Beading Loom

Wrap around your tees several times to anchor the thread and then go across the loom to the tees on the opposite side.

If I use beading wire as my warp threads on the beading loom, may I use silk or nylon thread as the weft threads or will the wire cut the thread over time? I am planning to make a large bracelet using semi-precious stone chips as the beads.

I wouldn't use thread for the design you are talking about. The as well as the wire will most likely cut through the thread. I have designed a woven...

185 Resource(s) Found
Page 1 of 10

Results Per Page 20 | 50 | 100