Print out the drawing in 1:1 to the measurements as shown in illustration in pdf.
Put double sided tape on the backside of the drawings positioned as illustrated. Attach it to the cardboard. Pierce holes through the three dots using a thick needle. Cut out along red outline as illustrated and remove the remaining paper.
Remove paper pattern.
Open three 8mm jumprings using flat-nose pliers. Insert the jumprings and the pendants art. 6722 from the Swarovski crystal assortment into the holes.
Close the jumprings sideways with flat-nose pliers.
Put double sided tape onto one end of the cardboard and adhere it to the other end in order to form a lantern.
Permission to copy this instruction sheet is granted for non-commercial educational purposes only. All other reproduction
requires written permission. Please email email@example.com
for more information.