How to Use Beadalon® MULTIPLIERS™

Presented by Rose, Jewelry Production Specialist, Content Development Group,
Instructions by Rachel, Content Development Group, Exclusively for Fire Mountain Gems and Beads®

In this how-to video led by jewelry designer Rose, see why two heads are better than one with these time-saving pliers from Beadalon®.
Use the chain-nose pliers end of the Beadalon MULTIPLIERS to make a 90-degree bend approximately 3/4 inch from one end of a length of wire.
Position the round-nose plier end close to the bend then bring the wire around the top round mandrel of the pliers, forming a loop. Reposition the jaws so the bottom mandrel passed through the loop to finish it.

Use a separate pair of chain-nose pliers to wrap the end of the wire around the longer end close to the loop, creating approximately three to four wraps.
String the desired pattern of beads, then use the chain-nose end of the pliers to make a 90-degree bend close to the beads. Repeat Step 2 to finish the loop.
Use flush-cutters to trim excess wire.

: : : Additional Resources : : :

Have a question regarding this project? Email Customer Service.

Copyright Permissions

Permission to copy this instruction sheet is granted for non-commercial educational purposes only. All other reproduction requires written permission. Please email for more information.