Single-Strand Necklace and Earrings with Crystal Passions® Classic Cut Pendant Drops
Hover over to zoom.
Design Idea RK2C
-- Designer --
Patti, Jewelry Designer, Exclusively for Fire Mountain Gems and Beads®
To learn more about Patti Miller, read her jewelry artist success story here.
: : : Materials : : :
Click here to view a full list of materials used in this design.
Please take the creative opportunity to select the products of your choice for this design, offered here at Fire Mountain Gems and Beads. Some materials may not be available or listed.
- Jump ring, gold-plated brass, 4mm round, 2.4mm inside diameter, 20 gauge
- Rubber tool dip, liquid coating Tool Magic® white
- Chain ball, 1.3mm faceted / lobster claw clasp, gold-finished brass adjustable 16-23.5 inch
- Jump ring, gold-plated brass, 4.5mm round, 3.1mm inside diameter, 22 gauge
- Jump ring, gold-plated brass, 7mm round, 5.1mm inside diameter, 18 gauge
- Chain beaded & clover, 3mm / 8mm filigree, gold-finished brass
- Drop crystal golden shadow, Crystal Passions® 10mm pendant classic cut 6430
- Drop light amethyst, Crystal Passions® 10mm pendant classic cut 6430
- Drop peridot, Crystal Passions® 10mm pendant classic cut 6430
- Drop aquamarine, Crystal Passions® 10mm pendant classic cut 6430
- Drop Montana, Crystal Passions® 10mm pendant classic cut 6430
- Ear wire French hook gold-plated, 20mm / open loop, 20 gauge brass
- Drop crystal golden shadow, Crystal Passions® 8mm pendant classic cut 6430
- Drop light amethyst, Crystal Passions® 8mm pendant classic cut 6430
- Drop peridot, Crystal Passions® 8mm pendant classic cut 6430
- Drop aquamarine, Crystal Passions® 8mm pendant classic cut 6430
- Drop Montana, Crystal Passions® 8mm pendant classic cut 6430
- Bail, ice-pick, gold-plated brass, 6x2.5mm with 3.5mm grip length
Instructions
Necklace Instructions
Step 1
Cut the following lengths of gold-finished 8mm clover chain:
- One 1/4 inch length
- One 2/3 inch length
- One 1-inch length
- One 1-1/2 inch length
- One 1-2/3 inch length
Step 2
Using 4mm 20-gauge gold-plated round jump rings, attach Crystal Passions® 10mm pendant classic cut drops in the color of your choice to each length of chain cut in Step 1.
Step 3
Attach a 4mm 20-gauge gold-plated round jump ring to the bare end of each of the five lengths of chain. Then thread all five chain dangles onto a 7mm 18-gauge gold-plated round jump ring.
Step 4
Clamp a 6x2.5mm gold-plated ice-pick bail onto the 7mm jump ring.
Step 5
Thread your desired length of gold-finished 1.3mm faceted ball chain through the bail.
Earring Instructions
Step 1
Cut the following lengths of gold-finished 8mm clover chain:
- One 1/4 inch length
- One 2/3 inch length
- One 1-inch length
- One 1-1/2 inch length
- One 1-2/3 inch length
Step 2
Using 6x2.5mm gold-plated ice-pick bails, attach Crystal Passions® 8mm pendant classic cut drops in the color of your choice to each length of chain cut in Step 1.
Step 3
Attach a 4mm 20-gauge gold-plated round jump ring to the bare end of each of the five lengths of chain. Then thread all five chain dangles onto a 7mm 18-gauge gold-plated round jump ring.
Step 4
Clamp a 6x2.5mm gold-plated ice-pick bail onto the 7mm jump ring.
Step 5
Attach the bail to a 20mm 20-gauge gold-plated French hook ear wire.
Step 6
Repeat Steps 1 – 5 for the second earring.
Shop for Your Materials Here:
Copyright Permissions
The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We encourage you to substitute different colors, products and techniques to make the design your own.
All works of authorship (articles, videos, tutorials and other creative works) are from the Fire Mountain Gems and Beads® Collection, and permission to copy is granted for non-commercial educational purposes only. All other reproduction requires written permission. For more information, please email copyrightpermission@firemtn.com.