Single-Strand Necklace with Swarovski Crystal
Courtesy of Swarovski
B7HC
''Pegasus'' Pendant
Get inspired by Swarovski design team's limitless imagination. Magical project ideas bring a new dimension to simple techniques.
: : : Materials : : :
- Bead, Swarovski crystal, light azore, 6mm round (7 beads)
- Bead, Swarovski crystal, white alabaster, 6mm round (2 beads)
- Bead, Swarovski crystal, Pacific opal, 8mm round (1 bead)
- Bead, Swarovski crystal, white alabaster, 8mm round (1 bead)
- Pliers, round-nose
- Pliers, flat-nose
- Pliers, chain-nose
- Pliers, side-cutter
- Tweezers
-
Bead, Swarovski crystal, chrysolite, 5mm bicone (6 beads)
-
Focal, Swarovski crystal, mosaic Pacific opal, 50mm Pegasus (1 focal)
-
Headpins, silver (17 headpins)
-
Jumprings, silver, 6mm (17 jumprings)
-
Jumprings, silver, 12mm (31 jumprings)
-
Ribbon satin, grey, 2mm
-
- Optional:
- Beads, Swarovski crystal, 5mm bicone
- Focals, Swarovski crystal, Pegasus
- Cord, satin
- Headpins
- Jumprings
STEP 1
Take 2 closed 12mm jumprings and attach the satin ribbon onto them as you see in the illustration.
STEP 2
Open two 12mm jumprings and attach them to the first two jumprings. Take another 12mm jumpring and hang it onto the 4 others as you see in illustration. Repeat this step with one more 12mm jumpring (see illustration).
STEP 3
Repeat Step 2 nine times and hang another 12mm jumpring with the Swarovski pendant article 6015/A mosaic Pacific opal onto last 2 jumprings.
STEP 4
Take a headpin and slide on one Swarovski bead article 5000 and form a loop with round-nose pliers and cut off excess with side-cutter. Repeat this step 16 times with the other Swarovski beads article 5000.
STEP 5
Open 17 6mm jumprings with flat-nose pliers and hang the Swarovski beads with onto the 12mm jumprings of the Swarovski pendant. See the illustration for correct positioning.
STEP 6
Remove satin ribbon and hold the two jumprings with tweezers. Insert satin ribbon into the 4 jumprings as you see in illustration and repeat Step 1 to fix the satin ribbon. Remove the upper two jumprings with pliers.
: : : Additional Resources : : :
Have a question regarding this project?
Email Customer Service.
Copyright Permissions
Permission to copy this instruction sheet is granted for non-commercial educational purposes only. All other reproduction
requires written permission. Please email copyrightpermission@firemtn.com
for more information.