Jewelry-Making Techniques
Ring with Swarovski Crystal and Polymer Clay
Design and Instructions submitted by Melita Amede
E420
: : : Materials : : :
- Chaton, Swarovski crystal rhinestone, crystal clear, foil back, 1.5-1.6mm Xilion round, PP9
- Ring finding, imitation rhodium-plated ''pewter'' (zinc-based alloy), 20x7mm rounded rectangle, size 8
- Polymer clay
-
Chaton, Swarovski crystal rhinestone, Indian pink, foil back, 3-3.2mm Xirius round, PP24
STEP 1
Wearing vinyl gloves pinch and roll clay in fingers on an acrylic slate to desired thickness.
STEP 2
Adhere the clay in the open channel of the ring.
STEP 3
Use thumb in a horizontal motion to smooth and get desired thickness.
STEP 4
Attach Swarovski crystals onto the clay in the channel of the ring starting with the PP24 along the middle of the ring (making sure to leave about 1.5-2mm at both the right and left side of the end of the ring).
STEP 5
Attach Swarovski crystals onto the clay in the channel of the ring starting with the PP24 along the middle of the ring (making sure to leave about 1.5-2mm at both the right and left side of the end of the ring).
STEP 6
Remove any excess clay around the grooves before baking in an oven at 275 degrees Fahrenheit (135 degrees Celsius) for 18 minutes *(approximately 15 minutes per 6mm).
: : : Additional Resources : : :
Have a question regarding this project?
Email Customer Service.
Copyright Permissions
Permission to copy this instruction sheet is granted for non-commercial educational purposes only. All other reproduction
requires written permission. Please email copyrightpermission@firemtn.com
for more information.