You can use the indicated color combination according to the detailed drawing or you can choose the colors according to your own design. The bracelet which we have described corresponds to the standard bracelet length of 17cm without the fastening. You can lengthen or shorten the bracelet as required.
Start with arranging the central strip made of the seed bead squares using the so-called right-angle weave stitch (RAW stitch). The initial row always consists of five rings.
Connect the final three loops according to the drawing onto one side of the central strip made of squares. String 18xR11 and pass the needle and line once again through the fifth R11 and add 4xR11. String the outer row of squares according to the drawing and repeat the stringing two more times.
Connect the final cut bead on the second side of the central strip. String 5xR11, 1xFPB6 and 1xR11 according to the drawing, pass the line back through the cut bead and the nearest R11, add 4xR11, pass the needle and line through the outer row of the central strip of squares and repeat the stringing two more times.
Start stringing the outer curves. First string the internal curve and then the outer one. Pass the line through the outer side S, 1xR7 and 1xF and then pass the line through the outer S one more time. Then string 15xF and pass the line through the fifth outer S and 1xR7 according to the drawing and pass the line through the S once again. Repeat the stringing of the inner curve six more times.
Start the outer curve by stringing 11xB, pass the line through the R7 from the inner curve, add 2xR7 and pass the line through the R7 from the outer curve once again. Repeat this procedure six more times. End the stringing with a strong knot and hide the line in the holes of the nearest seed beads.
Permission to copy this instruction sheet is granted for non-commercial educational purposes only. All other reproduction
requires written permission. Please email email@example.com
for more information.