The basic knot for terminating stringing material. This knot lets you end your piece for use with a bead tip. You can also use this knot to connect threads going in the same direction. For example, this is how you tie the threads together when starting a kumihimo piece.
How: Make a loop with the thread or group of threads, and pass the end through the loop. Pull to tighten.
This knot is what we recommend when you're ending a piece made with elastic cord, or any other slippery stringing material. The surgeon's knot is basically a square knot with an extra twist; providing more friction and therefore more security.
How: Bring the left cord over and around the right cord twice. Cross the right cord over the left cord, through the loop and pull to tighten.
How: Fold your length of cord in half, pass the fold through the hole of your component, then pass the ends of the cord through the loop.
This knot allows you to create necklaces and bracelets that are conveniently adjustable in length. Since a clasp isn't needed, this is a great technique when you're making pieces for those with metal allergies.
How: First make an overhand knot at both ends of your cord, near the tips. This is to give the piece a finished look and keep the adjustable knot from being pulled free. Make an overhand knot with the right cord around the left cord, go through the loop twice. Slide the knot you just made down to the end knot of the right cord. With the left cord, do the same knot around the right cord. You can now adjust the length of the design by pulling on the knots or the cord.
This knot is generally used for decorative purposes, as it's not super secure. You might want to use this in macramé designs for an extra flair.
How: Pass your cord through a bead already used in the design. For a loop with the thread, perpendicular to and behind where the beads are already strung. Bring the thread over the thread that has beads and through the loop. Pull to tighten. Pass through the next bead and continue.
This is a somewhat secure knot that most already know. Remember the rhyme? Right over left, left over right makes a square knot nice and tight. Because this knot is designed to be easily untied, you may only want to use this in low-strain applications. This can be used to temporarily connect two cords together but is more often seen as a decorative knot in macramé. You might recognize this look from parachute bracelets and shamballa-style bracelets.
How: Bring the left cord over the right cord and around. Cross the right cord over the left cord, through the loop and pull to tighten.
Similar to an adjustable knot, a fisherman's knot is used to securely join two pieces of thread together. Used often by seasoned anglers, the fisherman's knot is simple to tie--consisting of two overhand knots that are pulled together to tighten.
How: Hold the two separate pieces of thread with the ends facing each other. With the first thread, tie an overhand knot about five inches in from the end of the second thread. With the second thread, tie an overhand knot about five inches in from the end of the first thread. Pull the two knots together to create a firm hold (the knots should rest tight against each other).
This knot can be used to add decoration to a base material, such as a pendant or bangle. You can also use this to create a different style of adjustable knot; just perform the steps around two cords that have been knotted at the tips like with the adjustable knot.
How: Cut a length of cord, about 10 inches; this is your binding cord. Make a loop at the end that's about 3/4 inch, hold it in place on the cord(s) you are wrapping with your non-dominate thumb. Wrap the loose end of the binding cord around the cord(s); including over the loop you're holding on place. Make several of these wraps, keeping it loose and not completely covering the loop. Thread the end of the binding cord back through the loop. Pull both ends of the binding cord to secure.