Multi-Strand Necklace and Earring Set with Acrylic with Rubberized Acrylic Beads, Celestial Crystal® Beads and Accu-Flex® Beading Wire

Necklace

STEP 1
String one 13x1.5mm silver-plated tube bead onto an eyepin. Using a pair of round-nose pliers, chain-nose pliers and flush-cutters, form a simple loop on the straight end of the wire, creating a 13x1.5mm silver-plated tube beading link. Repeat to create sixteen 13x1.5mm silver-plated tube beading links.

Repeat to create each of the following:
  • Two 10mm round black with turquoise stripe rubberized beading links, using one 4x1mm dotted rondelle antiqued pewter bead, one 10mm round black with turquoise stripe rubberized bead, and one 4x1mm dotted rondelle antiqued pewter bead on a 2-inch eyepin
  • One 10mm round black with pink stripe rubberized beading link, using one 4x1mm dotted rondelle antiqued pewter bead, one 10mm round black with pink stripe rubberized bead, and one 4x1mm dotted rondelle antiqued pewter bead on a 2-inch eyepin
  • One 10mm round black with green stripe rubberized beading link, using one 5x2mm dotted rondelle antiqued pewter bead, one 10mm round black with green stripe rubberized bead, and one 5x2mm dotted rondelle antiqued pewter bead on a 2-inch eyepin
  • Two 8mm round pink druk beading links, using one 5x2mm dotted rondelle antiqued pewter bead, one 8mm round pink druk bead, and one 5x2mm dotted rondelle antiqued pewter bead on a 2-inch eyepin
  • One 8mm faceted round lime green Celestial Crystal beading link, using one 5x2mm dotted rondelle antiqued pewter bead, one 8mm faceted round lime green Celestial Crystal, and one 5x2mm dotted rondelle antiqued pewter bead on a 2-inch eyepin
  • One 8mm faceted round turquoise blue Celestial Crystal beading link, using one 5x2mm dotted rondelle antiqued pewter bead, one 8mm faceted round turquoise blue Celestial Crystal, and one 5x2mm dotted rondelle antiqued pewter bead on a 2-inch eyepin
  • One 14mm round black with turquoise stripe rubberized beading link, using one 5x2mm dotted rondelle antiqued pewter bead, one 14mm round black with turquoise stripe rubberized bead, and one 5x2mm dotted rondelle antiqued pewter bead on a 2-inch eyepin
  • One 14mm round black with green stripe rubberized bead with bead caps beading link, using one 8mm beaded cone silver-plated bead cap, one 14mm round black with green stripe rubberized bead, and one 8mm beaded cone silver-plated bead cap on a 2-inch eyepin
  • One 14mm round black with pink stripe rubberized bead with bead caps beading link, using one 8mm beaded cone silver-plated bead cap, one 14mm round black with pink stripe rubberized bead, and one 8mm beaded cone silver-plated bead cap on a 2-inch eyepin
  • One 14mm round black with turquoise stripe rubberized bead with bead caps beading link, using one 8.5x4mm twisted rope silver-plated bead cap, one 14mm round black with turquoise stripe rubberized bead, and one 8.5x4mm twisted rope silver-plated bead cap on a 2-inch eyepin
  • Two 24x16mm flat oval fuchsia rubberized beading links, using one 5x2mm dotted rondelle antiqued pewter bead, one 24x16mm flat oval fuchsia rubberized bead, and one 5x2mm dotted rondelle antiqued pewter bead on a 2-inch eyepin
  • One 20x12mm oval black with green stripe rubberized bead with bead caps beading link, using one 8.5x4mm twisted rope silver-plated bead cap, one 10mm round black with green stripe rubberized bead, and one 8.5x4mm twisted rope silver-plated bead cap on a 2-inch eyepin
  • Two 20x12mm oval black with turquoise stripe rubberized bead with bead caps beading links, using one 8mm beaded cone silver-plated bead cap, one 20x12mm oval black with turquoise stripe rubberized bead, and one 8mm beaded cone silver-plated bead cap on a 2-inch eyepin
  • One 18mm puffed round black with green stripe rubberized bead with bead caps beading link, using one 8mm beaded cone silver-plated bead cap, one 18mm puffed round black with green stripe rubberized bead, and one 8mm beaded cone silver-plated bead cap on a 2-inch eyepin
  • One 18mm puffed round black with pink stripe rubberized bead with bead caps beading link, using one 8.5x4mm twisted rope silver-plated bead cap, one 18mm puffed round black with pink stripe rubberized bead, and one 8.5x4mm twisted rope silver-plated bead cap on a 2-inch eyepin

First Strand

STEP 2
Using a pair of chain-nose pliers and flat-nose pliers, open a 6mm jumpring. Pass it through the first loop on the outer portion of the slide lock clasp and the first loop on a 13x1.5mm silver-plated tube beading link. Close the jumpring.
STEP 3
Continue connecting components in the following order with one 6mm fancy jumpring in between each beading link:
  • 10mm round black with turquoise stripe rubberized beading link
  • 13x1.5mm silver-plated tube beading link
  • 10mm round black with pink stripe rubberized beading link
  • 20x12mm oval black with turquoise stripe rubberized bead with bead caps beading link
  • 13x1.5mm silver-plated tube beading link
  • 14mm round black with green stripe rubberized bead with bead caps beading link
  • 8mm faceted round turquoise blue Celestial Crystal beading link
  • 13x1.5mm silver-plated tube beading link
  • 18mm puffed round black with pink stripe rubberized bead with bead caps beading link
  • 13x1.5mm silver-plated tube beading link
  • 14mm round black with turquoise stripe rubberized bead with bead caps beading link
  • 13x1.5mm silver-plated tube beading link
  • 8mm faceted round lime green Celestial Crystal beading link
  • 13x1.5mm silver-plated tube beading link
  • 24x16mm flat oval fuchsia rubberized beading link
  • 13x1.5mm silver-plated tube beading link
  • 20x12mm oval black with turquoise stripe rubberized bead with bead caps beading link
  • 13x1.5mm silver-plated tube beading link
  • 18mm puffed round black with green stripe rubberized bead with bead caps beading link
  • 13x1.5mm silver-plated tube beading link
  • 14mm round black with pink stripe rubberized bead with bead caps beading link
  • 13x1.5mm silver-plated tube beading link
  • 8mm round pink druk beading link
  • 13x1.5mm silver-plated tube beading link
  • 24x16mm flat oval fuchsia rubberized beading link
  • 13x1.5mm silver-plated tube beading link
  • 10mm round black with turquoise stripe rubberized beading link
  • 13x1.5mm silver-plated tube beading link
  • 20x12mm oval black with green stripe rubberized bead with bead caps beading link
  • 8mm round pink druk beading link
  • 13x1.5mm silver-plated tube beading link
  • 14mm round black with turquoise stripe rubberized beading link
  • 10mm round black with green stripe rubberized beading link
  • 13x1.5mm silver-plated tube beading link
STEP 4
Open a 6mm fancy jumpring. Pass it through the loop on the last 13x1.5mm silver-plated tube beading link and the first loop on the inner portion of the clasp. Close the jumpring.

Second Strand

STEP 5
Open a 6mm fancy jumpring. Pass it through the second loop of the outer portion of the clasp. Close the jumpring. Repeat to attach a jumpring to the third and fourth loop, and also to the second, third and fourth loop on the inner portion of the clasp.
STEP 6
Using flush-cutters, cut a 24-inch length of black Accu-Flex® professional-quality beading wire. String onto the wire one crimp tube. Pass the wire through the jumpring attached to the second loop on the outer portion of the clasp and back through the crimp tube leaving one end of the wire approximately one inch long. Pull the crimp against the jumpring creating a loop approximately 1/4 inch around the jumpring. Place a small amount of adhesive inside the crimp (optional).
STEP 7
String onto the beading wire a crimp tube. Measure 1/2 inch down the wire from the first crimp and crimp the crimp tube using crimping pliers. String onto the wire one 4x1mm dotted rondelle antiqued pewter bead, one 10mm round black with pink stripe rubberized bead, one 4x1mm dotted rondelle antiqued pewter bead and one crimp tube. Crimp the crimp tube next to the 4x1mm dotted rondelle antiqued pewter bead.
STEP 8
Repeat Step 7 to add the following beads to the beading wire using one crimp tube, one 4x1mm dotted rondelle antiqued pewter bead, one of the following components, one 4x1mm dotted rondelle antiqued pewter bead and one crimp tube to hold each bead in place:
  • One 10mm round black with green stripe rubberized bead 1-1/2 inches from the previous bead
  • One 8mm faceted round turquoise blue Celestial Crystal 1-1/2 inches from the previous bead
  • One 20x12mm oval black with pink stripe rubberized bead 1-1/2 inches from the previous bead
  • One 8mm faceted round lime green blue Celestial Crystal 1-1/2 inches from the previous bead
  • One 10mm round black with white stripe rubberized bead 1-1/2 inches from the previous bead
  • One 14mm round black with green stripe rubberized bead 1-1/2 inches from the previous bead
  • One 8mm round pink druk bead 1-1/2 inches from the previous bead
  • One 10mm round black with turquoise stripe rubberized bead 1-1/2 inches from the previous bead
STEP 9
String onto the beading wire one crimp tube. Measure 2 inches down the wire from the last crimp tube. Pass the wire through the second jumpring on the inner portion of the clasp and back through the crimp tube. Pull the crimp against the jumpring creating a loop approximately 1/4 inch around the jumpring. Place a small amount of adhesive inside the crimp (optional).

Using the crimping pliers, crimp the crimp tube. Using flush-cutters, trim the excess wire from the short end.

Place a crimp cover over the crimp tube then gently close it.

Third Strand

STEP 10
Using flush-cutters, cut a 23-inch length of black Accu-Flex® beading wire. Repeat Step 6 to attach the wire to the jumpring on the third loop on the outer portion of the clasp.
STEP 11
Repeat Step 7 to add the following beads to the beading wire using one crimp tube, one 4x1mm dotted rondelle antiqued pewter bead, one of the following components, one 4x1mm dotted rondelle antiqued pewter bead and one crimp tube to hold each bead in place:
  • One 10mm round black with pink stripe rubberized bead one inch from the previous bead
  • One 10mm round black with turquoise stripe rubberized bead 1-1/2 inches from the previous bead
  • One 10mm round black with white stripe rubberized bead 1-1/2 inches from the previous bead
  • One 10mm round black with green stripe rubberized bead 1-1/2 inches from the previous bead
  • One 10mm round black with turquoise stripe rubberized 1-1/2 inches from the previous bead
  • One 10mm round black with pink stripe rubberized bead 1-1/2 inches from the previous bead
  • One 10mm round black with white stripe rubberized bead 1-1/2 inches from the previous bead
  • One 10mm round black with pink stripe rubberized bead 1-1/2 inches from the previous bead
  • One 10mm round black with green stripe rubberized bead 1-1/2 inches from the previous bead
STEP 12
String onto the beading wire one crimp tube. Measure one inch down the wire from the last crimp tube. Repeat Step 9 to attach the wire to the third jumpring on the inner portion of the clasp.

Place a crimp cover over the crimp tube then gently close it.

Fourth Strand

STEP 13
Using flush-cutters, cut a 22-inch length of black Accu-Flex® beading wire. Repeat Step 6 to attach the wire to the jumpring on the fourth loop on the outer portion of the clasp.
STEP 14
Repeat Step 7 to add the following beads to the beading wire using one crimp tube, one 4x1mm dotted rondelle antiqued pewter bead, one of the following components, one 4x1mm dotted rondelle antiqued pewter bead and one crimp tube to hold each bead in place:
  • One 10mm round black with pink stripe rubberized bead one inch from the previous bead
  • One 20x12mm oval black with turquoise stripe rubberized bead 1-1/2 inches from the previous bead
  • One 8mm faceted round turquoise blue Celestial Crystal 1-1/2 inches from the previous bead
  • One 14mm round black with pink stripe rubberized bead 1-1/2 inches from the previous bead
  • One 10mm round black with green stripe rubberized 1-1/2 inches from the previous bead
  • One 10mm round black with turquoise stripe rubberized bead 1-1/2 inches from the previous bead
  • One 14mm round black with green stripe rubberized bead 1-1/2 inches from the previous bead
  • One 10mm round black with turquoise stripe rubberized bead 1-1/2 inches from the previous bead
  • One 8mm round pink druk bead 1-1/2 inches from the previous bead
STEP 15
String onto the beading wire one crimp tube. Measure one inch down the wire from the last crimp tube. Repeat Step 9 to attach the wire to the fourth jumpring on the inner portion of the clasp.

Place a crimp cover over the crimp tube then gently close it.

Earrings

STEP 1
String one 13x1.5mm silver-plated tube bead onto an eyepin. Using a pair of round-nose pliers, chain-nose pliers and flush-cutters, form a simple loop on the straight end of the wire, creating a 13x1.5mm silver-plated tube beading link. Repeat to create four 13x1.5mm silver-plated tube beading links.

Repeat to create two 10mm round black with pink stripe rubberized bead drops, using one 4x1mm dotted rondelle antiqued pewter bead, one 10mm round black with pink stripe rubberized bead, and one 4x1mm dotted rondelle antiqued pewter bead on a headpin.
STEP 2
Using a pair of chain-nose pliers and flat-nose pliers, open a 6mm fancy jumpring. Pass it through the loop on an earwire, one 13x1.5mm silver-plated tube beading link and another 6mm fancy jumpring. Close the jumpring.
STEP 3
Using chain-nose pliers, open the loop on a 13x1.5mm silver-plated tube beading link and pass it though the loop on the 13x1.5mm silver-plated tube beading link from Step 2. Close the loop.

Open the opposite loop on the 13x1.5mm silver-plated tube beading link. Pass it through the loop on a 10mm round black with pink stripe rubberized bead drop. Close the loop.
STEP 4
Using flush-cutters, cut a 5-3/4 inch length of black Accu-Flex® beading wire. Pass the wire through the second 6mm fancy jumpring attached to the earwire in Step 2, leaving one end of the wire approximately 3 inches long. Pass a crimp over the both lengths of wire, pulling the crimp against the jumpring creating a loop approximately 1/4 inch around the jumpring. Place a small amount of adhesive inside the crimp (optional).

Using the crimping pliers, crimp the crimp tube.
STEP 5
Separate the two strands of beading wire. String onto the 2-3/4 inch length of beading wire one 4mm faceted round lime green Celestial Crystal bead and a crimp tube. Measure 1/2 inch down the wire from the first crimp and crimp the crimp tube using crimping pliers.
STEP 6
String onto the wire one 4x1mm dotted rondelle antiqued pewter bead, one 10mm round black with pink stripe rubberized bead, one 4x1mm dotted rondelle antiqued pewter bead and one crimp tube. Measure 1-1/2 inch down the wire from the previous crimp and crimp the crimp tube next to the 4x1mm dotted rondelle antiqued pewter bead.
STEP 7
String onto the 3-inch length of beading wire one 4mm faceted round turquoise Celestial Crystal bead and a crimp tube. Measure 1-inch down the wire from the first crimp and crimp the crimp tube using crimping pliers.
STEP 8
String onto the wire one 4x1mm dotted rondelle antiqued pewter bead, one 10mm round black with pink stripe rubberized bead, one 4x1mm dotted rondelle antiqued pewter bead and one crimp tube. Measure 1-1/2 inches down the wire from the previous crimp and crimp the crimp tube next to the 4x1mm dotted rondelle antiqued pewter bead.
STEP 9
Repeat Steps 2 - 8 to create the second earring.

: : : Additional Resources : : :

The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We encourage you to substitute different colors, products and techniques to make the design your own.

Have a question regarding this design idea? Email Customer Service.

Recommended Just for You