Bracelet with Sterling Silver Jumprings, Charms and Beads and Silver-Plated Brass with Double-Sided Epoxy Drops

STEP 1
String one sterling silver 4mm round bead onto a 2-inch headpin. Using a pair of chain-nose pliers, round-nose pliers and flush-cutters, form a simple loop on the straight end of the headpin, creating a sterling silver 4mm round bead drop.

Repeat to create the following bead drops using one bead and one 2-inch headpin for each:
  • Two sterling silver 5mm round bead drops
  • One sterling silver 6mm round bead drop
STEP 2
Using a pair of chain-nose pliers and flat-nose pliers, open a 20-gauge 7x5mm jumpring. Pass it through the loop on the toggle bar portion of the clasp, two 6x4mm jumprings, two 20-gauge 7x5mm jumprings, and two 6x4mm jumprings. Close the jumpring. Repeat to attach a second 20-gauge 7x5mm jumpring to the loop on the clasp and through all of the jumprings.
STEP 3
Open a 20-gauge 7x5mm jumpring. Pass it through the loop on the center two 20-gauge 7x5mm jumprings from Step 2, two 6x4mm jumprings, two 7x5mm jumprings, and two 6x4mm jumprings. Close the jumpring. Repeat to attach a second 20-gauge 7x5mm jumpring to the center two 20-gauge 7x5mm jumprings from Step 2 and through all of the jumprings.
STEP 4
Open a 20-gauge 7x5mm jumpring. Pass it through the loop on the center two 20-gauge 7x5mm jumprings from Step 3, two 6x4mm jumprings, two 20-gauge 7x5mm jumprings, two 6x4mm jumprings, and one 7x5mm jumpring. Close the jumpring. Repeat to attach a second 20-gauge 7x5mm jumpring to the center two 20-gauge 7x5mm jumprings from Step 3 and through all of the jumprings.

Continue to create a chain of thirty-seven pairs of 20-gauge 7x5mm jumprings with five assorted jumprings on each side of the pair of 20-gauge 7x5mm jumprings attaching the last set of jumprings to the toggle ring portion of the clasp.
STEP 5
Open the loop on a sterling silver 4mm round bead drop. Pass it through the jumpring on the twenty-second set of 20-gauge 7x5mm jumprings. Close the loop.

Repeat to attach a sterling silver 5mm bead drop through the jumpring on the twenty-fourth set and the twenty-eighth set of 20-gauge 7x5mm jumprings.

Repeat to attach a sterling silver 6mm bead drop through the jumpring on the thirty-second set of 20-gauge 7x5mm jumprings.
STEP 6
Open a 7x5mm jumpring. Pass it through a pink silver plated flower and through the jumpring on the twenty-sixth set of 20-gauge 7x5mm jumprings.

Repeat to attach a sterling silver 12mm flower through the jumpring on the thirtieth set of 20-gauge 7x5mm jumprings.

Repeat to attach a sterling silver 20mm filigree daisy through the jumpring on the thirtieth set of 20-gauge 7x5mm jumprings.

: : : Additional Resources : : :

The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We encourage you to substitute different colors, products and techniques to make the design your own.

Have a question regarding this design idea? Email Customer Service.

Recommended Just for You