Bib-Style Necklace and Earring Set with Glass Beads and Antiqued Silver-Plated Drops, Components and Chain

Necklace

STEP 1
String one 8mm round red with silver glass bead onto a 1-inch eyepin. Using a pair of round-nose pliers, chain-nose pliers and flush-cutters, form a simple loop on the straight end of the wire, creating an 8mm round red with silver glass beading link. Repeat to create a total of seven 8mm round red with silver glass beading links.

Repeat to create a total of eight 8mm round green with silver glass beading links using one 8mm round green with silver glass bead and one 1-inch eyepin.
STEP 2
Using the G-S hypo cement, attach a 2.6mm flat back light Siam crystal onto the bottom of an antiqued silver-plated 30x20mm hammered diamond drop approximately 1/4 inch from the bottom. Repeat to attach a 2.6mm flat back light Siam crystal onto the bottom of a total of six antiqued silver-plated 30x20mm hammered diamond drops.
STEP 3
Using flush-cutters, cut fifteen 2-1/2 inch lengths of antiqued silver-plated 4.8x3.3mm cable chain.
STEP 4
Open the bottom loop on one 8mm round red with silver glass beading link. Pass the loop through the first link on a 2-1/2 inch length of chain. Close the loop. Repeat to attach a 2-1/2 inch length of chain to a total of eight 8mm round red with silver glass beading links and eight 8mm round green with silver glass beading links.

First Tier

STEP 5
Using flush-cutters, cut two 9-inch lengths of antiqued silver-plated 4.8x3.3mm cable chain. String an antiqued silver-plated 25mm hammered open flat round onto a 9-inch length of chain. Using a pair of chain-nose pliers and flat-nose pliers, open a 6mm jumpring. Pass the jumpring through the first loop on the toggle bar portion of the clasp and the first and last link of the 9-inch length of chain. Close the jumpring. Repeat to attach a 9-inch length of chain with an antiqued silver-plated 25mm hammered open flat round using a 6mm jumpring to the toggle ring portion of the clasp.
STEP 6
Using memory wire shears, cut an opening in an antiqued silver-plated 12mm hammered open flat round to create a 12mm jumpring. Repeat to create a total of eight 12mm jumprings using antiqued silver-plated 12mm hammered open flat rounds, and create six 12x10mm oval jumprings using antiqued silver-plated 12x10mm hammered open flat ovals.
STEP 7
Open a 12mm jumpring. Pass it through the 25mm hammered open flat round attached to the toggle bar portion of the clasp and another 25mm hammered open flat round. Close the jumpring. Repeat to attach a chain of eight 25mm hammered open flat rounds ending with the 25mm hammered open flat round attached to the toggle ring portion of the clasp.

Second Tier

STEP 8
Using flush-cutters, cut two 10-inch lengths of antiqued silver-plated 4.8x3.3mm cable chain. String an antiqued silver-plated 30mm hammered open flat round onto a 10-inch length of chain. Open a 6mm jumpring. Pass the jumpring through the second loop on the toggle bar portion of the clasp and the first and last link of the 10-inch length of chain. Close the jumpring. Repeat to attach a 10-inch length of chain with an antiqued silver-plated 30mm hammered open flat round using a 6mm jumpring to the toggle ring portion of the clasp.
STEP 9
Open a 12x10mm oval jumpring. Pass it through the 30mm hammered open flat round attached to the toggle bar portion of the clasp and another 30mm hammered open flat round. Close the jumpring. Repeat to attach a chain of seven 30mm hammered open flat rounds ending with the 30mm hammered open flat round attached to the toggle ring portion of the clasp.

Dangles

STEP 10
Open a 6mm jumpring. Pass it through the loop on one 8mm round red with silver glass beading link, the loop on an antiqued silver-plated 23x18mm hammered teardrop, the first antiqued silver-plated 25mm hammered open flat round component from Step 5 and the first antiqued silver-plated 30mm hammered open flat round focal from Step 8. Close the jumpring.

Repeat to attach an 8mm round red with silver glass beading link and the loop on a antiqued silver-plated 23x18mm hammered teardrop to the eighth antiqued silver-plated 25mm hammered open flat round component from Step 7 and the seventh antiqued silver-plated 30mm hammered open flat round from Step 9.
STEP 11
Open a 6mm jumpring. Pass the jumpring through the loop on one 8mm round red with silver glass beading link, then loop through one antiqued silver-plated 30x20mm hammered diamond with a light Siam crystal drop and the third antiqued silver-plated 25mm hammered open flat round from Step 6. Close the jumpring. Repeat to attach an 8mm round red with silver glass beading link and one antiqued silver-plated 30x20mm hammered diamond with a light Siam crystal drop to the sixth silver 25mm hammered open flat round from Step 6 and an 8mm round green with silver glass beading link and one antiqued silver-plated 30x20mm hammered diamond with a light Siam crystal drop to the second, fourth, fifth and seventh silver 25mm hammered open flat round from Step 6.
STEP 12
Open the loop on one 8mm round green with silver glass beading link. Pass it through the bottom of the first antiqued silver-plated 30mm hammered open flat round from Step 8. Close the loop. Repeat to attach one 8mm round green with silver glass beading link.
STEP 13
Open a 6mm jumpring. Pass the jumpring through the loop on one 8mm round green with silver glass beading link, then loop through one antiqued silver-plated 30x20mm hammered diamond and the third silver-plated 30mm hammered open flat round from Step 8. Close the jumpring. Repeat to attach an 8mm round green with silver glass beading link and one antiqued silver-plated 30x20mm hammered diamond drop to the fifth antiqued silver-plated 35mm hammered open flat round from Step 9.
STEP 14
Open a 6mm jumpring. Pass the jumpring through the loop on one 8mm round red with silver glass beading link, then loop through one antiqued silver-plated 25mm hammered donut and the second silver-plated 30mm hammered open flat round from Step 8. Close the jumpring. Repeat to attach an 8mm round red with silver glass beading link and one antiqued silver-plated 25mm hammered donut to the fourth and sixth antiqued silver-plated 30mm hammered open flat round from Step 9.

Earrings

STEP 1
String one 8mm round red with silver glass bead onto a 1-inch eyepin. Using a pair of round-nose pliers, chain-nose pliers and flush-cutters, form a simple loop on the straight end of the eyepin, creating an 8mm round red with silver glass beading link. Repeat to create a total of two 8mm round red with silver glass beading links.

Repeat to create two 8mm round green with silver glass beading links using one 8mm round green with silver glass bead and one 1-inch eyepin.
STEP 2
Using the G-S hypo cement, attach a 2.6mm flat back light Siam crystal onto the bottom of an antiqued silver-plated 30x20mm hammered diamond, approximately 1/4 inch from the bottom. Repeat to attach a 2.6mm flat back light Siam crystal onto the bottom of a total of two antiqued silver-plated 30x20mm hammered diamonds.
STEP 3
Using flush-cutters cut the following: two 1-1/2 inch lengths and two 2-1/2 inch lengths of antiqued silver-plated 4.8x3.3mm cable chain.
STEP 4
Open the bottom loop on one 8mm round red with silver glass beading link. Pass the loop through the first link on a 2-1/2 inch length of chain. Close the loop. Repeat to attach a 2-1/2 inch length of chain to the second 8mm round red with silver glass beading link. Close the loop. Repeat using a 1-1/2 inch length chain to two 8mm round green with silver glass beading links.
STEP 5
Using a pair of chain-nose pliers and round-nose pliers, form a fish hook earwire on the end of a 1-inch eyepin. Repeat to create a total of two earwires. Open a 6mm jumpring. Pass it through the loop on an earwire. Close the jumpring. Repeat to attach a 6mm jumpring to the second earwire.
STEP 6
Using memory wire shears cut an opening in an antiqued silver-plated 12x10mm hammered open flat oval to create antiqued silver-plated 12x10mm hammered open flat oval jumpring. Repeat to create a total of two jumprings.
STEP 7
Open a 12x10mm jumpring. Pass it through one antiqued silver-plated 20mm hammered open flat round and one antiqued silver-plated 16mm hammered open flat round. Close the jumpring.
STEP 8
Open a 6mm jumpring. Pass it through the loop on one 8mm round red with silver glass beading link, the antiqued silver-plated 16mm hammered open flat round from Step 6 and the jumpring attached to the first earwire. Close the jumpring.

Repeat to attach an 8mm round green with silver glass beading link and the loop on an antiqued silver-plated 30x20mm hammered diamond to the antiqued silver 20mm hammered open flat round from Step 7.
STEP 9
Repeat Steps 7 and 8 to create the second earring.

: : : Additional Resources : : :

The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We encourage you to substitute different colors, products and techniques to make the design your own.

Have a question regarding this design idea? Email Customer Service.

Recommended Just for You