Lariat-Style Necklace, Bracelet and Earring Set with Swarovski Crystal, Black Onyx Gemstone Beads and Sterling Silver Stardust Beads

Necklace

STEP 1
Using flush-cutters cut thirty-four 3-inch lengths of sterling silver Figaro chain.
STEP 2
Using wire nippers, cut a 6-inch length of Accu-Flex® Professional Quality Beading Wire.
STEP 3
String onto the beading wire the following:
  • One crimp bead and the first link of seventeen 3-inch lengths of chain and back through the crimp bead
Using the crimping pliers, crimp the crimp tube. Using wire nippers, trim the excess wire from the short end.
STEP 4
String onto the beading wire the following:
  • One silver-plated star bead cap (open end toward the crimp bead)
  • One Swarovski 17mm Artemis jet crystal (open end over bead cap)
  • One Swarovski 32x13mm cylinder with chatons (tip of artemis crystal fitted inside cylinder)
  • One Swarovski 17mm Artemis jet crystal (pointed end into cylinder)
  • One silver-plated star bead cap
  • One 8mm round black onyx bead
  • One crimp bead
  • One silver-plated Accu-guard wire protector
STEP 5
Pass the wire back through the crimp bead.

Pull the wire tight against the crimp and Accu-guard. Place a small amount of adhesive inside the crimp (optional).

Using the crimping pliers, crimp the crimp tube. Using wire nippers, trim the excess wire from the short end.

Place a silver-plated stardust crimp cover over the crimp tube then gently close it.
STEP 6
Repeat Step 3 to create a second crystal drop assembly using the following beads.

String onto the beading wire the following:
  • One silver-plated star bead cap (open end toward the crimp bead)
  • One Swarovski 17mm Artemis jet crystal (open end over bead cap)
  • One Swarovski 32x13mm cylinder with chatons (tip of artemis crystal fitted inside cylinder)
  • One Swarovski 17mm Artemis jet crystal (pointed end into cylinder)
  • One silver-plated star bead cap (set inside the open end of the Artemis)
  • One 8mm round black onyx bead
  • One silver-plated star bead cap
  • One Swarovski black rhinestone band silver plated 6mm round bead
  • One silver-plated star bead cap
  • One 8mm round black onyx bead
  • One crimp bead
  • One silver-plated Accu-guard wire protector
STEP 7
Pass the wire back through the crimp bead. Pull the wire tight against the crimp and Accu-guard. Place a small amount of adhesive inside the crimp (optional). Using the crimping pliers, crimp the crimp tube. Using wire nippers, trim the excess wire from the short end.

Place a silver-plated stardust crimp cover over the crimp tube then gently close it.
STEP 8
Using wire nippers, cut a 24-inch length of Accu-Flex beading wire. String one crimp bead, one silver Accu-guard and the Accu-guard loop on the first crystal drop assembly from Step 3. Pass the wire back through the crimp tube, leaving one end of the wire approximately 1-inch long. Pull the crimp tight against the Accu-guard. Place a small amount of adhesive (Loctite®) inside the crimp (optional).

Using the crimping pliers, crimp the crimp tube. Using wire nippers, trim the excess wire from the short end.

Place a silver-plated stardust crimp cover over the crimp tube then gently close it.
STEP 9
String onto the beading wire the following:
  • One silver-plated star bead cap (toward the 8mm black onyx bead)
  • One 8mm black onyx bead
  • One silver-plated star bead cap (toward the 8mm black onyx bead)
  • One Swarovski black rhinestone band silver plated 6mm round bead
  • One silver-plated star bead cap (toward the 8mm black onyx bead)
  • One silver-plated star bead cap
  • One silver-plated star bead cap (toward the 8mm black onyx bead)
  • One Swarovski black rhinestone band silver plated 6mm round bead
  • Three sterling silver 4mm round stardust beads
  • The Accu-guard loop on the second crystal drop assembly from Step 7
  • One silver-plated star bead cap
  • Twenty-five sets of three sterling silver 4mm round stardust beads and one Swarovski black rhinestone band silver plated 6mm round bead
  • Three sterling silver 4mm round stardust beads
STEP 10
Place one crimp tube onto the beading wire after the last bead. Pass the beading wire over the hook on the s-shaped clasp and back through crimp, and then pull the wire snugly so the crimp is closer to clasp. Make sure there is no slack along the length of the first part of the necklace. Place a small amount of gel adhesive inside the crimp (optional).

Using the crimping pliers, crimp the crimp tube. Using wire nippers, trim excess wire from the end.

Place a crimp cover over the crimp tube then gently close it.

Bracelet

STEP 1
String one silver-plated 12x6mm filigree dome bead cap, one Swarovski 14mm faceted round jet crystal, one silver-plated 12mm filigree dome bead cap and one sterling silver 4mm round stardust bead onto black crystal headpin. Using a pair of chain-nose pliers, round-nose pliers and flush-cutters, form a simple loop on the straight end of the wire.
STEP 2
Using a pair of chain-nose pliers and bent-nose pliers, open a 7x5mm oval jumpring. Pass it through the loop on the toggle ring portion of the clasp and the loop on the bead drop. Close the jumpring.
STEP 3
Using flush-cutters, cut a 12-inch length of Accu-Flex beading wire. String one crimp bead and the small jumpring attached to the toggle ring clasp. Pass the wire back through the crimp tube, leaving one end of the wire approximately 1 inch long. Pull the crimp tight against the jumpring. Place a small amount of gel adhesive (Loctite®) inside the crimp (optional).

Using the crimping pliers, crimp the crimp tube. Using flush-cutters, trim the excess wire from the short end.

Place a silver-plated stardust crimp cover over the crimp tube then gently close it.
STEP 4
String onto the beading wire the following:
  • Seven sets of one silver-plated 12x6mm filigree dome bead cap (toward the 14mm round bead), one Swarovski jet 14mm round bead, one silver-plated 12mm filigree dome bead cap (toward the 14mm round bead) and one Swarovski and silver-plated 8x3.5mm rondelle bead
  • One silver-plated 12x6mm filigree dome bead cap
  • One Swarovski jet 14mm round bead
  • One silver-plated 12x6mm filigree dome bead cap
  • Four sterling silver 4mm round stardust beads
STEP 5
Place one crimp tube onto the beading wire after the last bead. Pass the beading wire through the jumpring on the bar portion of the toggle clasp and back through the crimp then pull the wire snugly so the crimp is closer to clasp. Make sure there is no slack along the length of the first part of the bracelet. Place a small amount of gel adhesive inside the crimp (optional).

Using the crimping pliers, crimp the crimp tube. Using flush-cutters, trim excess wire from the end.

Place a crimp cover over the crimp tube then gently close it.

Earrings

STEP 1
String one silver-plated 12x6mm filigree dome bead cap, one Swarovski jet 14mm round bead, one silver-plated 12x6mm filigree dome bead cap and one sterling silver 4mm round stardust bead onto a black Swarovski crystal rhinestone and silver-plated headpin. Using a pair of chain-nose pliers, round-nose pliers and flush-cutters, form a simple loop on the straight end of the wire. Repeat to create two bead drops.
STEP 2
Using a pair of chain-nose pliers and bent-nose pliers, open the loop on an earwire. Pass it through the loop on a bead drop. Close the loop.

Repeat to create the second earring.

: : : Additional Resources : : :

The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We encourage you to substitute different colors, products and techniques to make the design your own.

Have a question regarding this design idea? Email Customer Service.

Recommended Just for You