Double-Strand Necklace and Bracelet Set with Swarovski Crystal, Sterling Silver Drops and Antiqued Sterling Silver Spacer Beads


For more inspiration, read this informative article ...

Based on a timeless classic, this Swarovski crystal white pearl jewelry set is the ultimate accessory for any outfit or event. The Swarovski crystal pearls are simply stunning, lustrous and flawless like a true pearl, featuring a creamy alabaster hue for ...

Necklace

STEP 1
Using flush-cutters, cut the following lengths of Accu-Flex® professional-quality beading wire:
  • One 18-inch length
  • One 24-inch length
  • One 5-1/2 inch length
STEP 2
String onto the 5-1/2 inch section of beading wire one gold-filled 2x2mm crimp bead and the jumpring attached to the tab portion of one sterling silver 9mm ball clasp. Pass the wire back through the crimp bead pulling the wire snug against the jumpring. Place a small amount of adhesive (Loctite®) inside the crimp (optional). Using the crimping pliers, crimp the crimp bead. Using flush-cutters, trim the excess wire from the short end. Place a silver-plated 4mm crimp cover over the crimp bead then gently close it.
STEP 3
String the following beads onto the beading wire:
  • One Swarovski white 8mm round crystal pearl
  • One silver-plated 8mm scalloped bead cap
STEP 4

Continue stringing the following:
  • Two silver-plated 8mm heishi beads
  • One silver-plated 8mm scalloped bead cap
  • One Swarovski white 8mm round crystal pearl
  • One silver-plated 8mm scalloped bead cap
  • Repeat this beading pattern for a total of eight sets plus two silver-plated 8mm heishi beads, one silver-plated 8mm scalloped bead cap and one Swarovski white 8mm round crystal pearl
STEP 5
String onto the beading wire one crimp and one Accu-Guard™ wire protector. Pass the wire protector through the top loop on one sterling silver 16mm round with star drop. Pass the wire back through the crimp bead pulling the wire snug against the wire protector. Place a small amount of adhesive (Loctite) inside the crimp (optional). Using the crimping pliers, crimp the crimp bead. Using flush-cutters, trim the excess wire from the short end. Place a silver-plated 4mm crimp cover over the crimp bead then gently close it.
STEP 6
String onto the 24-inch length of beading wire one crimp and one Accu-Guard wire protector. Pass the wire protector through the top loop on the opposite side of the sterling silver 16mm round with star drop. Pass the wire back through the crimp bead pulling the wire snug against the wire protector. Place a small amount of adhesive (Loctite) inside the crimp (optional). Using the crimping pliers, crimp the crimp bead. Using flush-cutters, trim the excess wire from the short end. Place a silver-plated 4mm crimp cover over the crimp bead then gently close it.
STEP 7
String the following beads and components onto the wire:
  • One Swarovski white 8mm round crystal pearl
  • One silver-plated 8mm scalloped bead cap
  • Two silver-plated 8mm heishi beads
  • One silver-plated 8mm scalloped bead cap
  • One Swarovski white 8mm round crystal pearl
  • One silver-plated 8mm scalloped bead cap
  • Two silver-plated 8mm heishi beads
  • One silver-plated 8mm scalloped bead cap
  • One Swarovski white 8mm round crystal pearl
  • One silver-plated 8mm scalloped bead cap
  • The top hole on one antiqued sterling silver 28x9mm spacer bar
  • One silver-plated 4mm round bead
  • Three sets of the following beads:
    • One silver-plated 8mm scalloped bead cap
    • One Swarovski white 8mm round crystal pearl
    • One silver-plated 8mm scalloped bead cap
    • Two silver-plated 8mm heishi beads
STEP 8
  • Twenty five Swarovski white 8mm round crystal pearls
  • One silver-plated 8mm scalloped bead cap
  • The top hole on one antiqued sterling silver 28x9mm spacer bar
  • One silver-plated 8mm scalloped bead cap
  • One Swarovski white 8mm round crystal pearl
  • One silver-plated 8mm scalloped bead cap
  • The top hole on one antiqued sterling silver 28x9mm spacer bar
  • Two sets of the following:
    • One silver-plated 8mm scalloped bead cap
    • One Swarovski white 8mm round crystal pearl
    • One silver-plated 8mm scalloped bead cap
    • Two silver-plated 8mm heishi beads
  • One silver-plated 8mm scalloped bead cap
  • One Swarovski white 8mm round crystal pearl
  • One silver-plated 4mm round bead
Add a bead stopper to the end of the strand and begin Step 9.
STEP 9
Repeat Step 6 to attach the 18-inch length of beading wire onto the bottom loop on the sterling silver star drop.
STEP 10
Repeat Step 7 stringing beading wire through the bottom hole on the spacer bars.
STEP 11
Repeat Step 8, but start with thirty five Swarovski white 8mm round crystal pearls.
STEP 12
Remove the bead stopper from the 24-inch strand and pass both beading wires through one silver-plated 8mm scalloped bead cap.
STEP 13
String onto both beading wires one crimp bead pulling the wire snug against the bead cap. Place a small amount of adhesive (Loctite) inside the crimp (optional). Using the crimping pliers, crimp the crimp bead. Using flush-cutters, trim the excess wire from the 18-inch (top wire). Place a silver-plated 4mm crimp cover over the crimp bead then gently close it.
STEP 14
Continue stringing the following beads onto the 24-inch strand of beading wire:
  • One Swarovski white 8mm round crystal pearl
  • One silver-plated 8mm scalloped bead cap
  • Two silver-plated 8mm heishi beads
Continue stringing eight sets of the following beads:
  • One silver-plated 8mm scalloped bead cap
  • One Swarovski white 8mm round crystal pearl
  • One silver-plated 8mm scalloped bead cap
  • Two silver-plated 8mm heishi beads
Continue stringing the following beads:
  • One silver-plated 8mm scalloped bead cap
  • One Swarovski white 8mm round crystal pearl
STEP 15
Repeat Step 2 to attach the beading wire to the ball portion of the clasp.

Bracelet

STEP 1
Using flush-cutters, cut the following lengths of Accu-Flex beading wire:
  • Two 6-inch lengths
  • One 4-inch length
STEP 2
Open one silver-plated 6mm twisted jumpring and pass it through the single loop on one sterling silver 16mm round with star drop and the loop on the tab portion of one sterling silver and smoky quartz square tab clasp. Close the jumpring.
STEP 3
String onto one 6-inch length of beading wire one crimp bead and the top loop on the opposite side of the sterling silver 16mm round with star drop. Pass the wire back through the crimp bead pulling the wire snug against the loop. Place a small amount of adhesive (Loctite) inside the crimp (optional). Using the crimping pliers, crimp the crimp bead. Using flush-cutters, trim the excess wire from the short end. Place a silver-plated 4mm crimp cover over the crimp bead then gently close it.
STEP 4
String the following beads and components onto the straight end of the wire:
  • One silver-plated 8mm scalloped bead cap
  • One Swarovski white 8mm round crystal pearl
  • One silver-plated 8mm scalloped bead cap
  • Two silver-plated 8mm heishi beads
  • One silver-plated 8mm scalloped bead cap
  • One Swarovski white 8mm round crystal pearl
  • One silver-plated 8mm scalloped bead cap
  • The first hole on one antiqued sterling silver 28x9mm spacer bar
  • One silver-plated 8mm scalloped bead cap
  • One Swarovski white 8mm round crystal pearl
  • One silver-plated 8mm scalloped bead cap
  • Five Swarovski white 8mm round pearls
  • One silver-plated 8mm scalloped bead cap
  • One Swarovski white 8mm round crystal pearl
  • One silver-plated 8mm scalloped bead cap
  • The first hole on a second antiqued sterling silver 28x9mm spacer bar
  • One silver-plated 8mm scalloped bead cap
  • One Swarovski white 8mm round crystal pearl
  • One silver-plated 8mm scalloped bead cap
  • The first hole on a third antiqued sterling silver 28x9mm spacer bar
  • One silver-plated 8mm scalloped bead cap
  • One Swarovski white 8mm round crystal pearl
  • One silver-plated 8mm scalloped bead cap
  • Two silver-plated 8mm heishi beads
  • One silver-plated 8mm scalloped bead cap
  • One Swarovski white 8mm round crystal pearl
  • One silver-plated 8mm scalloped bead cap
  • Two silver-plated 8mm heishi beads
  • One silver-plated 8mm scalloped bead cap
  • One Swarovski white 8mm round crystal pearl
  • One silver-plated 8mm scalloped bead cap
  • One silver-plated 4mm round bead
STEP 5
Repeat Steps 2 - 4 to string the second 6-inch beading wire onto the bottom loop on the sterling silver 16mm round with star drop and through the bottom hole on the sterling silver spacers.
STEP 6
String onto both 6-inch wires one silver-plated 8mm scalloped bead cap.
STEP 7
Repeat Step 3 to attach the joined 6-inch strands to the box portion of the clasp.
STEP 8
String onto the straight end of one 4-inch length of beading wire one crimp bead. Place a small amount of adhesive (Loctite) inside the crimp (optional). Using the crimping pliers, crimp the crimp bead. Place a silver-plated 4mm crimp cover over the crimp bead then gently close it.
STEP 9
Pass the straight end of the wire through the middle hole on the first antiqued sterling silver spacer bar then string the following beads and components onto the wire:
  • One silver-plated 8mm scalloped bead cap
  • One Swarovski white 8mm round crystal pearl
  • One silver-plated 8mm scalloped bead cap
  • Five Swarovski white 8mm round crystal pearls
  • One silver-plated 8mm scalloped bead cap
  • One Swarovski white 8mm round crystal pearl
  • One silver-plated 8mm scalloped bead cap
  • The middle hole on the second antiqued sterling silver 28x9mm spacer bar
  • One silver-plated 8mm scalloped bead cap
  • One Swarovski white 8mm round crystal pearl
  • One silver-plated 8mm scalloped bead cap
  • The middle hole on the third antiqued sterling silver 28x9mm spacer bar
STEP 10
String onto the straight end of the wire one crimp bead. Place a small amount of adhesive (Loctite) inside the crimp (optional). Using the crimping pliers, crimp the crimp bead. Place a silver-plated 4mm crimp cover over the crimp bead then gently close it.

: : : Additional Resources : : :

The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We encourage you to substitute different colors, products and techniques to make the design your own.

Have a question regarding this design idea? Email Customer Service.

Recommended Just for You