Multi-Strand Bracelet with Magnesite Gemstone Beads, Sterling Silver Spacer Bars and Sterling Silver Jumprings

STEP 1
String onto one silver-plated 1-1/4 inch eyepin the following components:
  • Two 4x2mm magnesite rondelle beads
  • One 4x1mm sterling silver beaded rondelle bead
  • Two 4x2mm magnesite rondelle beads
Using round-nose pliers, flat-nose pliers and flush-cutters form a simple loop on the straight end of the wire creating a magnesite beading link.

Repeat to create a total of eight magnesite beading links.
STEP 2
Pass one silver-plated 1-1/4 inch eyepin through the first hole on one 21x3.5mm sterling silver 4-strand spacer bar. Using round-nose pliers, flat-nose pliers and flush-cutters form a simple loop on the straight end of the wire creating a spacer bar beading link.

Repeat to create a beading link on each of the four holes on each of the three 21x3.5mm sterling silver 4-strand spacer bars.

First Strand

STEP 3
Using round-nose pliers and flat-nose pliers open one 6x4mm sterling silver oval jumpring. Pass the jumpring through the first loop on one 26x6mm sterling silver slide lock tube clasp. Close the jumpring.

Add a second jumpring next to the first for double jumprings.
STEP 4
Open another 6x4mm sterling silver jumpring and pass it through the double jumprings. Close the jumpring.
STEP 5
Repeat this pattern of double jumprings to single jumpring for three more sets attaching the last single jumpring to the first loop on one 21x3.5mm sterling silver 4-strand spacer bar beading link.
STEP 6
Open one 6x4mm sterling silver jumpring and pass it through the opposite loop on the first 21x3.5mm sterling silver 4-strand spacer bar beading link and the loop on one magnesite beading link. Close the jumpring.
STEP 7
Open one 6x4mm sterling silver jumpring and pass it through the opposite loop on the magnesite beading link and two additional 6x4mm sterling silver jumprings. Close the jumpring.
STEP 8
Open one 6x4mm sterling silver jumpring and pass it through the last set of double jumprings and an additional two jumprings. Close the jumpring.

Repeat the pattern of single to double jumprings for two more sets.
STEP 9
Open one 6x4mm sterling silver jumpring and pass it through the last set of double jumprings and the loop on a second 21x3.5mm sterling silver 4-strand spacer bar beading link. Close the jumpring.
STEP 10
Open one 6x4mm sterling silver jumpring and pass it through the opposite loop on the second 21x3.5mm sterling silver 4-strand spacer bar beading link and two additional jumprings. Close the jumpring.

Repeat the pattern of single to double jumprings for two more sets.
STEP 11
Open one 6x4mm sterling silver jumpring and pass it through the last set of double jumprings and the first loop on the second magnesite beading link. Close the jumpring.
STEP 12
Open one 6x4mm sterling silver jumpring and pass it through the opposite loop on the second magnesite beading link and the first loop on the third 21x3.5mm sterling silver 4-strand spacer bar beading link. Close the jumpring.
STEP 13
Open one 6x4mm sterling silver jumpring and pass it through the opposite loop on the third 21x3.5mm sterling silver 4-strand spacer bar beading link and two additional jumprings. Close the jumpring.

Repeat the pattern of single to double jumprings for two more sets.
STEP 14
Open one 6x4mm sterling silver jumpring and pass it through the last set of double jumprings and the first loop on the second half of the tube clasp. Close the jumpring.

Fourth Strand

STEP 15
Repeat Steps 3 - 17 replicate the chain links on the last loop on the first half of the 26x6mm sterling silver slide lock tube clasp.

Second Strand

STEP 16
Repeat Steps 3 - 5 for the second loop on the first half of the 26x6mm sterling silver slide lock tube clasp.
STEP 17
Open one 6x4mm sterling silver jumpring and pass it through the opposite loop on the second 21x3.5mm sterling silver 4-strand spacer bar beading link and two additional jumprings. Close the jumpring.

Repeat the pattern of single to double jumprings for two more sets.
STEP 18
Open one 6x4mm sterling silver jumpring and pass it through the last set of double jumprings and one loop on a magnesite beading link. Close the jumpring.
STEP 19
Open one 6x4mm sterling silver jumpring and pass it through opposite loop on the last magnesite beading link and the second loop on the second 21x3.5mm sterling silver 4-strand spacer bar beading link. Close the jumpring.
STEP 20
Open one 6x4mm sterling silver jumpring and pass it through opposite loop on the second 21x3.5mm sterling silver 4-strand spacer bar beading link and the first loop on one magnesite beading link. Close the jumpring.
STEP 21
Open one 6x4mm sterling silver jumpring and pass it through the opposite loop on the last magnesite beading link and two additional jumprings. Close the jumpring.

Repeat the pattern of single to double jumprings for two more sets.
STEP 22
Open one 6x4mm sterling silver jumpring and pass it through the last set of double jumprings and the second loop on the third 21x3.5mm sterling silver 4-strand spacer bar beading link. Close the jumpring.
STEP 23
Open one 6x4mm sterling silver oval jumpring. Pass the jumpring through the opposite loop on the third 21x3.5mm sterling silver 4-strand spacer bar beading link and two additional jumprings. Close the jumpring.

Repeat the pattern of single to double jumprings for two more sets.
STEP 24
Open one 6x4mm sterling silver jumpring and pass it through the last set of double jumprings and the second loop on the second half of the 26x6mm sterling silver slide lock tube clasp. Close the jumpring.

Third Strand

STEP 25
Repeat Steps 16 - 24 to create the third strand.

: : : Additional Resources : : :

The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We encourage you to substitute different colors, products and techniques to make the design your own.

Have a question regarding this design idea? Email Customer Service.

Recommended Just for You