Single-Strand Necklace with Swarovski Crystal

Get inspired by Swarovski design team's limitless imagination. Magical project ideas bring a new dimension to simple techniques.
STEP 1
Cut five 3/4 inch pieces of wire, five 1-inch pieces of wire, six 1-1/4 inch pieces of wire, four 1-1/2 inch pieces of wire.
STEP 2
Turn a simple loop on a 3/4 inch piece of wire and attach to one of the jumprings before closing the loop completely. Add one beads art. 5000 6mm marbled black and turn a simple loop on the other side. Repeat this Step with one crystal pearl art. 5810 6mm crystal mystic black pearl attaching one end of it to the looped bead marbled black.
STEP 3
Turn a simple loop on a 1-inch piece of wire and add a crystal pearl art. 5810 8mm crystal mystic black pearl. Turn a simple loop on the other end and attach to the loose end of the looped crystal pearl art. 5810 6mm crystal mystic black pearl from Step 2 before closing the loop completely.
STEP 4
Turn a simple loop on a 1-1/4 inch piece of wire and add a crystal pearl art. 5810 10mm crystal mystic black pearl. Turn a simple loop and attach to the looped crystal pearl from Step 3 in the same manner. Repeat this Step with a 1-1/2 inch piece of wire and the crystal pearl 14mm crystal mystic black pearl.
STEP 5
Repeat this process to attach the Swarovski beads in the following order: art. 5000 6mm, art. 5000 10mm, art. 5000 6mm, 5811 14mm, 5810 10mm, 5810 8mm, 5810 6mm.
STEP 6
Repeat the entire process for the other side of the necklace using the crystal ivory pearls in place of the crystal mystic black pearls. (You will have one 1-inch piece of wire leftover.)
STEP 7
Cut three 5 inch pieces (you will use the remaining piece in the last step). Wire wrap one piece through the last looped crystal pearl on one of the necklace strands and attach it to the fancy stones art. 4139 30mm marbled black. Wrap the wire around the fancy stone several times and trim excess wire.
STEP 8
Repeat this Step to attach the other necklace strand to the fancy stone art. 4139 30mm leaving approximately 1-inch between the two wire wraps on the fancy stone. (This is the top of the necklace.)
STEP 9
String the last crystal pearl art. 5810 8mm crystal ivory pearl onto the last 1-inch piece of wire and turn simple loops on both sides.
STEP 10
Attach the looped crystal pearl from Step 9 to the bottom of the fancy stone 30mm using the last 5-inch piece of wire as was done in Steps 7 and 8.
STEP 11
Using the remaining piece of wire, wire wrap the pendant art. 6039 25mm Jet to the bottom loop in the crystal ivory pearl that was attached to the necklace in Step 10 as was done in Step 10.

The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We encourage you to substitute different colors, products and techniques to make the design your own.

Have a question regarding this design idea? Email Customer Service.

Recommended Just for You