Triple-Strand Necklace and Earring Set with Swarovski Crystal, TierraCast® Antiqued Gold-Plated Pewter Clasp and Seed Beads


Necklace

STEP 1
Cut two 13-1/2 inch and four 9-1/2 inch lengths of Accu-Flex® professional-quality beading wire.
STEP 2
Attach one 5mm jumpring to the ring on each portion of the 9mm puffed flat round tab clasp.

Attach one 6x4mm oval jumpring to the loop on each portion of the hammered teardrop toggle clasp and two closed 6x4mm oval jumprings.

Attach one 5mm jumpring to the loop on the 10x6mm lobster claw clasp.
STEP 3
Pass one 6x4mm oval jumpring through one astral pink 36x26mm Devoted 2 U Heart focal and the jumpring on the lobster claw clasp then close. Repeat to attach a second jumpring creating double jumprings.

Attach the lobster claw clasp to the loop on the ring portion of the toggle clasp.
STEP 4
String the following onto one 13-1/2 inch length of beading wire: one gold-filled 2x2mm crimp bead, one Accu-Guard™ and the oval jumprings on the bar portion of the toggle clasp. Pass the beading wire back through the crimp bead. Pull the beading wire so the crimp rests snug against the Accu-Guard leaving approximately 1/4 inch of beading wire on the end.

Insert one end of each 9-1/2 inch length of beading wire into the crimp bead (so the long ends of all of the beading wire lay the same direction). Crimp then trim the short end of each beading wire. Finish with a 4mm crimp cover.
STEP 5
String the following onto one length of beading wire:
  • Five metallic gold #11 seed beads
  • Seven Pacific opal 3mm bicones
  • One metallic gold #11 seed bead
  • One Pacific opal 4mm round
  • One gold-plated crystal AB 4x2mm rondelle
  • One summer blush 6mm bicone
  • One gold-plated crystal AB 4x2mm rondelle
  • One Pacific opal 4mm round
  • One metallic gold #11 seed bead
  • Fifteen Pacific opal 3mm bicones
  • One metallic gold #11 seed bead
  • One Pacific opal 4mm round
  • One gold-plated crystal AB 4x2mm rondelle
  • One astral pink 8x6mm rondelle
  • One gold-plated crystal AB 4x2mm rondelle
  • One Pacific opal 8mm round
  • One gold-plated crystal AB 4x2mm rondelle
  • One astral pink 8x6mm rondelle
  • One gold-plated crystal AB 4x2mm rondelle
  • One Pacific opal 4mm round
  • One metallic gold #11 seed bead
  • Seventeen Pacific opal 3mm bicones
  • One metallic gold #11 seed bead
  • One Pacific opal 4mm round
  • One gold-plated crystal AB 4x2mm rondelle
  • One gold-plated crystal AB 4x2mm rondelle
  • One Pacific opal 4mm round
  • One metallic gold #11 seed bead
  • One Pacific opal 3mm bicone
  • Five metallic gold #11 seed beads
Place a Bead Stopper™ on the end of the strand.
STEP 6
String the following onto one length of beading wire:
  • Five metallic gold #11 seed beads
  • Six Pacific opal 3mm bicones
  • One metallic gold #11 seed bead
  • One Pacific opal 4mm round
  • One gold-plated crystal AB 4x2mm rondelle
  • One summer blush 6mm bicone
  • One gold-plated crystal AB 4x2mm rondelle
  • One Pacific opal 8mm round
  • One gold-plated crystal AB 4x2mm rondelle
  • One summer blush 6mm bicone
  • One gold-plated crystal AB 4x2mm rondelle
  • One Pacific opal 4mm round
  • One metallic gold #11 seed bead
  • Eleven Pacific opal 3mm bicones
  • One metallic gold #11 seed bead
  • One Pacific opal 4mm round
  • One gold-plated crystal AB 4x2mm rondelle
  • One astral pink 8x6mm rondelle
  • One gold-plated crystal AB 4x2mm rondelle
  • One metallic gold #11 seed bead
  • One Pacific opal 4mm round
  • One gold-plated crystal AB 4x2mm rondelle
  • One astral pink 8x6mm rondelle
  • One gold-plated crystal AB 4x2mm rondelle
  • One Pacific opal 4mm round
  • One metallic gold #11 seed bead
  • Seven Pacific opal 3mm bicones
  • One metallic gold #11 seed bead
  • One astral pink 4x3mm rondelle
  • One metallic gold #11 seed bead
  • Eight Pacific opal 3mm bicones
  • One metallic gold #11 seed bead
  • One Pacific opal 4mm round
  • One gold-plated crystal AB 4x2mm rondelle
  • One summer blush 6mm bicone
  • One gold-plated crystal AB 4x2mm rondelle
  • One Pacific opal 8mm round
  • One gold-plated crystal AB 4x2mm rondelle
  • One summer blush 6mm bicone
  • One gold-plated crystal AB 4x2mm rondelle
  • One Pacific opal 4mm round
  • Six metallic gold #11 seed beads
Place a Bead Stopper on the end of the strand.
STEP 7
String the following onto one length of beading wire:
  • Five metallic gold #11 seed beads
  • Two Pacific opal 3mm bicones
  • One metallic gold #11 seed bead
  • One astral pink 4x3mm rondelle
  • One metallic gold #11 seed bead
  • Eleven Pacific opal 3mm bicones
  • One metallic gold #11 seed bead
  • One Pacific opal 4mm round
  • One gold-plated crystal AB 4x2mm rondelle
  • One astral pink 8x6mm rondelle
  • One gold-plated crystal AB 4x2mm rondelle
  • One Pacific opal 4mm round
  • One metallic gold #11 seed bead
  • Four Pacific opal 3mm bicones
  • One metallic gold #11 seed bead
  • One astral pink 4x3mm rondelle
  • One metallic gold #11 seed bead
  • Eighteen Pacific opal 3mm bicones
  • One metallic gold #11 seed bead
  • One Pacific opal 4mm round
  • One gold-plated crystal AB 4x2mm rondelle
  • One summer blush 6mm bicone
  • One gold-plated crystal AB 4x2mm rondelle
  • One Pacific opal 4mm round
  • One metallic gold #11 seed bead
  • Six Pacific opal 3mm bicones
  • One metallic gold #11 seed bead
  • One astral pink 4x3mm rondelle
  • One metallic gold #11 seed bead
  • Six Pacific opal 3mm bicones
  • Six metallic gold #11 seed beads
STEP 8
Remove the Bead Stoppers from the other strands and string one gold-filled 2x2mm crimp bead onto all three strands. Crimp then trim the short ends of beading wire. Do not trim the 13-1/2 inch length of beading wire.Finish with a crimp cover.
STEP 9
Continue to string: one tangerine 8mm round and one metallic gold #11 seed bead. Repeat this sequence to string a total of ten sets.
STEP 10
Continue to string the following:
  • One tangerine 8mm round
  • One gold-filled 2x2mm crimp bead
  • One Accu-Guard wire protector
  • The jumpring on one portion of the tab clasp
Crimp, then trim the short end of each beading wire. Finish with a 4mm crimp cover.
STEP 11
String the following onto the second 13-1/2 inch length of beading wire: one gold-filled 2x2mm crimp bead, one Accu-Guard wire protector and the loop on the 12x7mm lobster claw clasp.
STEP 12
Repeat Steps 4 - 10 to create the second half of the necklace.
STEP 13
Attach the lobster claw clasp (Step 11) and the bar portion to the ring portion of the toggle clasp.

Earrings

STEP 1
Cut two 6-inch lengths of beading wire.
STEP 2
Place a Bead Stopper on one end of one 6-inch length of beading wire.
STEP 3
String the following onto the beading wire:
  • Five metallic gold #11 seed beads
  • One Pacific opal 3mm bicone
  • Seven metallic gold #11 seed beads
  • One astral pink 17x13mm Devoted 2 U Heart drop
  • Seven metallic gold #11 seed beads
  • One Pacific opal 3mm bicone
  • Five metallic gold #11 seed beads
STEP 4
Remove the Bead Stopper and bring both ends of the beading wire together so the beads rest in the center.
STEP 5
String the following onto both ends of the beading wire:
  • One summer blush 6mm bicone
  • One gold-plated crystal AB 4x2mm rondelle
  • One Pacific opal 6mm round
  • One gold-plated crystal AB 4x2mm rondelle
  • One Pacific opal 4mm round
  • One gold-filled 2x2mm crimp bead
  • One Accu-Guard
Pass the beading wire back through the crimp. Pull the beading wire so the crimp rests snug against the Accu-Guard. Crimp, then trim the excess from the short end of the beading wire.
STEP 6
Pass one 5mm jumpring through the Accu-Guard and the loop on one 6mm half ball earstud then close.

: : : Additional Resources : : :

The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We encourage you to substitute different colors, products and techniques to make the design your own.

Have a question regarding this design idea? Email Customer Service.

Recommended Just for You