Single-Strand Necklace and Earring Set with Swarovski Crystal and Chain
Greek Cross Necklace and Earrings
-- Designer --
Courtesy of Swarovski
If a product is not available, please feel free to substitute similar products from our offerings:
- Drop, Swarovski crystal, crystal rose gold 2X, 14mm Greek cross pendant (5 drops)
- Drop, Swarovski crystal, crystal silver night, 18mm faceted Greek cross pendant (4 drops)
- Drop, Swarovski crystal, crystal rose gold 2X, 28mm Greek cross pendant (1 drop)
Jumpring, 6mm oval (4 jumprings)
Jumpring, 10mm round (2 jumprings)
Earwire, black, fishhook (2 earwires)
Clasp, toggle (3 clasps)
Chain, 10mm round cable (20 inches)
Chain, 8x5mm oval cable (4 inches)
- Earwires, fishhook
- Clasps, toggle
- Chain, cable
Get inspired by Swarovski design team's limitless imagination. Magical project ideas bring a new dimension to simple techniques.
Remove four links from the round cable chain, separate them and set aside. Open the end link of the round cable chain and attach it to one end of the toggle clasp. Repeat for the other side of the chain with the other end of the clasp. Close links to secure.
Open the 6mm jumprings. Attach one jumpring to two of the chain links that was removed in Step 1. Lay this three link chain out so that the 6mm jumpring is between the two larger links. Attach one of the larger links to the 28mm Swarovski pendant art. 6867 and close the link to secure. Attach the other side to the center link of the necklace chain.
Attach another of the links removed from the chain to one of the 18mm Swarovski pendant art. 6867 and to the second link to the right of the 28mm pendant. Repeat this step to add another 18mm pendant to the left side of the 28mm pendant.
Attach an open 6mm jumpring to the 14mm Swarovski pendants art. 6867 and attach it to the second link to the right of the 18mm pendant added in Step 3. Repeat this step to add a second 14mm pendant to the left side of the necklace.
Attach an open jumpring to one 14mm pendant and attach to the last link in the necklace chain near the circle end of the toggle clasp. Close the link to secure.
Cut the chain in half. Open the link at one end of the chain and attach to the 14mm Swarovski pendant art. 6867. Close the loop to secure.
Open the loop at the bottom of the earwire and attach to the second link in the chain (right after the 14mm pendant). Close the loop to secure.
Open a 10mm jumpring and attach it to circle end of the toggle clasp, then to the 18mm Swarovski pendant art. 6867 and then to the bottom link in the chain. Close the jumpring to secure. Repeat to create second earring.
The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We
encourage you to substitute different colors, products and techniques to make the design your own.
Have a question regarding this design idea? Email Customer Service.