Double-Strand Necklace and Earring Set with Swarovski Crystal, White Lotus™ Cultured Freshwater Pearls and Liquid Silver-Finished Brass Beads

Necklace

STEP 1
Cut the following lengths:
  • One 17-inch length and two 9-1/2 inch lengths Accu-Flex professional-quality beading wire
  • Four 3-inch lengths 6.5x5mm ribbed cable chain
  • Nine 10-inch lengths Invizi™-Cord nylon cord
  • Six 1/2 inch lengths French wire

Tassel

STEP 2
String onto one 1-inch eyepin: one sapphire and blue 8mm pave ball and one 11x10mm scalloped bead cap. Form a simple loop creating a sapphire and blue pave link.
STEP 3
Pass one end of one 8-inch length of Invizi-Cord through the loop on one end of the sapphire and blue pave link (8mm pave end) then match up the ends of the cord.

String onto both ends of the cord:
  • Repeat this sequence to string four sets:
    • One sapphire and blue 8mm pave ball
    • One 3mm seamless look round
  • One sapphire and blue 10mm pave ball
  • One crimp
STEP 4
Pull the cord so beads are snug then crimp. Trim excess from the short end of the beading wire then finish with a 3mm crimp cover.
STEP 5
Close Up Stringing of the Tassel Pass one end of one 8-inch length of Invizi-Cord through one loop on the bead cap then match up the ends of the cord.

String the following onto both ends of the cord:
  • One 5x1mm straight tube
  • One 3mm seamless look round
  • One white semi round pearl
  • One 3mm seamless look round
  • Two white semi round pearls
  • One 3mm seamless look round
  • One 5x1mm straight tube
  • One 3mm seamless look round
  • One sapphire and blue 4mm pave ball
  • One sapphire and blue 6mm pave ball
  • One crimp
Repeat Step 4 to create a sapphire and blue pave tassel drop.

Repeat to create a total of nine sapphire and blue pave tassel drops.

First Strand

STEP 6
String onto the 17-inch length of beading wire: one crimp and one French wire. Pass the beading wire back through the crimp. Pull the beading wire so the crimp rests snug against the French wire leaving approximately 1/4 inch of beading wire on the end.

Crimp, then trim the excess from the short end of the beading wire. Finish with a 3mm crimp cover.
STEP 7
String the following onto the beading wire:
  • Repeat this sequence to string three sets:
    • Two 5x1mm straight tubes
    • One 3mm seamless look round
    • One white button pearl
    • One 3mm seamless look round
    • Two white button pearls
    • One 3mm seamless look round
    • One white button pearl
    • One 3mm seamless look round
  • One 3mm seamless look round
  • One white button pearl
  • One 3mm seamless look round
  • Two white button pearls
  • One 3mm seamless look round
  • One white button pearl
STEP 8
Continue to string one 3mm seamless look round then repeat Step 7 in the opposite direction to string the second half of the necklace. Repeat Step 6 to secure the strand.

Second Strand

STEP 9
Repeat Step 6 using one 9-1/2 inch length of beading wire to begin the second strand.

String the following onto the beading wire:
  • One white button pearl
  • One 3mm seamless look round
  • Repeat this sequence to string two sets:
    • One 5x1mm straight tube
    • One 3mm seamless look round
    • One white button pearl
    • One white button pearl
    • One 3mm seamless look round
    • Two white button pearls
    • One 3mm seamless look round
    • One white button pearl
    • One 3mm seamless look round
  • One 5x1mm straight tube
  • One 3mm seamless look round
  • One sapphire and blue 8mm pave ball
  • One 3mm seamless look round
  • One white button pearl
  • One 3mm seamless look round
  • Two white button pearls
  • One 3mm seamless look round
  • One sapphire and blue 8mm pave ball
  • One sapphire and blue 10mm pave ball
  • One sapphire and blue 8mm pave ball
  • One 3mm seamless look round
  • Two white button pearls
  • One 3mm seamless look round
  • One white button pearl
Repeat Step 6 to secure the strand.

Repeat to create a duplicate strand.
STEP 10
Pass one 4mm jumpring through the loop on the tassel (Step 2) and the smaller bottom loop on one 14x6mm clover link.

Pass one 4mm jumpring through the French wire on the pave ball end of one portion of the second strand and a larger loop on one side of the clover link then close. Repeat to attach the second portion of the second strand to the larger loop on the opposite side of the clover link.
STEP 11
Use one 4mm jumpring to connect the French wire on one end of the first strand to the first link on one end of one length of chain. Repeat to attach the opposite end of the strand to the first link on a second length of chain.

Repeat to attach a length of chain to each end of the second strand.
STEP 12
Use one 4mm jumpring to connect the last link on each end of the first strand to the top loop on one portion of the 2-strand toggle clasp. Repeat to connect each end of the second strand to the bottom loops on the toggle clasp.

Earrings

STEP 1
Cut two 6-inch lengths Accu-Flex professional-quality beading wire.
STEP 2
String one crimp onto one end of one length of beading wire then crimp.

Continue to string the following:
  • One sapphire and blue pave ball
  • One 3mm seamless look round
  • One 5x1mm straight tube
  • One 3mm seamless look round
  • Two white semi round pearls
  • One 3mm seamless look round
  • One white semi round pearl
  • One 3mm seamless look round
  • One 5x1mm straight tube
  • One crimp
  • One Accu-Guard wire protector
  • The loop on one fishhook earwire
STEP 3
Pass the beading wire back through the crimp. Pull the beading wire so the crimp rests snug against the Accu-Guard leaving approximately 1/4 inch of beading wire on the end.

Crimp, then trim the excess from the short end of the beading wire. Finish with a 3mm crimp cover.
STEP 4
Repeat Steps 2 and 3 to create a second earring.

: : : Additional Resources : : :

The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We encourage you to substitute different colors, products and techniques to make the design your own.

Have a question regarding this design idea? Email Customer Service.

Recommended Just for You