Get inspired by Swarovski design team's limitless imagination. Magical project ideas bring a new dimension to simple techniques.
Cut out a piece of paper to a length of 24.9x7cm. Draw the measurements as shown in the illustrations in this step.
Apply tape and then pierce 25 holes with a needle through the tape and paper to make the pattern shown.
Fold the paper outwards where the red lines are. These symbolize the outward fold of the paper and the blue lines are the inward folds.
Flatten the folded lines and carefully fold the edges inwards as depicted in the illustrations.
Turn the folded piece around. Cut 160cm of nylon thread and slide it in through the first hole at one end. Slide the Swarovski XILION bead art. 5328 8mm white opal onto the thread. Slide the nylon thread on to the back side and insert 3 seed beads, then insert the XILION bead art. 5328 8mm mint alabaster and then a XILION bead art. 5328 8mm Pacific opal. Remember to slide on 3 seed beads every time at the back of the pattern after inserting the XILION beads art. 5328. Repeat this step throughout towards the other end. Pull thread ends through all the beads again to close the napkin ring and pull it tight.
Make a double knot and cut off the rest of the thread. Pull the bigger part over the smaller one as shown in the illustrations and repeat the same for the other end as well.
Pull the bigger part over the smaller one as shown in the illustrations and repeat the same for the lower end as well. In this way you secure it at both ends.
Permission to copy this instruction sheet is granted for non-commercial educational purposes only. All other reproduction
requires written permission. Please email email@example.com
for more information.