Home
TierraCast Sale

Bib-Style Necklace and Earring Set with Swarovski Crystal and Metal Links and Components

Courtesy of Swarovski
BBCM

Rhombus Cubed Necklace and Chandelier Earrings

Get inspired by Swarovski design team's limitless imagination. Magical project ideas bring a new dimension to simple techniques.

: : : Materials : : :

Necklace

STEP 1
To create dangle sets cut chain into three 2.5-inch pieces, three 1.5-inch pieces, and three 0.5-inch pieces.
STEP 2
Open all 21 jumprings.
STEP 3
Add one Swarovski rhombus pendant article 6320 27mm to open jumpring and one 2.5-inch chain. Close jumpring. Repeat two more times.
STEP 4
Add one Swarovski rhombus pendant article 6320 19mm to open jumpring and one 1.5-inch chain. Close jumpring. Repeat two more times.
STEP 5
Add one Swarovski rhombus pendant article 6320 14mm to open jumpring and one 0.5-inch chain. Close jumpring. Repeat two more times.
STEP 6
Take one open jumpring and add one of each length. Close jumpring. Repeat two more times.
STEP 7
Using open jumpring add one rhombus set and one quatrefoil. Close jumpring. Repeat two more times.
STEP 8
Using open jumpring add to quatrefoil link and close jumpring. Repeat two more times.
STEP 9
Keeping the black suede on top of the sage suede then fold in half. Slide on the loose jumpring from the large quatrefoil set.
STEP 10
Cut three 5-inch pieces of wire.
STEP 11
While holding the suede lace approximately 0.5-inch from the jumpring begin wire-wrapping 4 - 6 times. Clip tails and tuck in wire ends.
STEP 12
Using one side of the suede slide on the loose jumpring from the medium quatrefoil set. Make sure to keep a 1.5-inch separation between the medium and large quatrefoil unit. While holding the suede lace approximately 0.5-inch from the jumpring begin wire-wrapping 4 - 6 times. Clip tails and tuck in wire ends. Repeat for opposite side.
STEP 13
Attach an open jumpring to each side of the toggle and close jumpring.
STEP 14
Slide the one end of the suede lace through one end of the toggle set with an overlap of 1-inch (adjust length as needed). While holding the suede lace approximately 1/2-inch from the jumpring begin wire-wrapping 4 - 6 times. Clip tails and tuck in wire ends. Repeat for other side.
STEP 15
Add remaining jumpring to Swarovski rhombus pendant article 6320 14mm rhombus. Then add to the circle side of the toggle and close jumpring.

Earrings

STEP 1
Cut chain into two 1.5-inch pieces, four 1-inch pieces and four 0.5-inch pieces.
STEP 2
Open all jumprings.
STEP 3
Using open jumpring add one fleur-de-lis charm and one 1.5-inch chain piece and close jumpring. Repeat for key charm.
STEP 4
Using open jumpring add one Swarovski rhombus pendant article 6320 19mm and one 1-inch chain piece and close jumpring. Repeat three times.
STEP 5
Using open jumpring add one Swarovski rhombus pendant article 6320 14mm and one 0.5-inch chain piece and close jumpring. Repeat three times.
STEP 6
Using open jumpring add (in order) one 0.5-inch rhombus unit, one 1-inch rhombus unit, one charm unit, one 1-inch rhombus unit and one 0.5-inch rhombus unit. Close jumpring. Repeat one more time.
STEP 7
Using open jumpring add one complete crystal unit and one quatrefoil. Close jumpring. Repeat one more time.
STEP 8
Using open jumpring add quatrefoil unit and ear wire. Close jumpring. Repeat one more time.

Have a question regarding this project? Email Customer Service.

Copyright Permissions

Permission to copy this instruction sheet is granted for non-commercial educational purposes only. All other reproduction requires written permission. Please email copyrightpermission@firemtn.com for more information.

´╗┐
Sign Up for Email Specials and Beading News
Sign Up
for Email Specials and Beading News