Home
TierraCast Sale

Single-Strand Necklace with Swarovski Crystal and Metal Components

Courtesy of Swarovski
C922

Geometric Harmony Necklace

Get inspired by Swarovski design team's limitless imagination. Magical project ideas bring a new dimension to simple techniques.

: : : Materials : : :

STEP 1
Open one 6mm jumpring and attach to one pendant art. 6470 32mm olivine from the Swarovski crystal assortment. Open one oval jumpring and link to 6mm jumpring. Open second oval jumpring and link to one hammertone rectangle and oval jumpring previously added. Open third oval jumpring and attach to the top end of the hammertone rectangle. Repeat times one. Set aside.
STEP 2
Open one 8mm jumpring and attach to one Swarovski pendant art. 6470 40mm olivine. Open one oval jumpring and link to 8mm jumpring. Open second oval jumpring and link to one hammertone rectangle and oval jumpring previously added. Open third oval jumpring and attach to a second hammertone rectangle. Open forth oval jumpring and attach to the top end of the hammertone rectangle. Set aside.
STEP 3
Using a 6-inch piece of 20-gauge wire perform a simple loop at one end. Slide on one bead art. 5601 8mm khaki, one bead art. 5328 4mm olivine, one unit from Step 1, one bead art. 5328, one bead art. 5601 8mm, one bead art. 5328, the unit made from Step 2, one bead art. 5328, one bead art. 5601 8mm, one bead art. 5328, one unit from Step 1, one bead art. 5328, one bead art. 5601 8mm. Perform simple loop on open end.
STEP 4
Cut suede lace in half. Insert through simple loop in one side of unit made in Step 3. Fold over suede by 1/2 inch. Cut 3 inches of 22-gauge wire and perform a wrapped coil around both pieces of suede lace in the direction toward the simple loop. Trim ends and tuck tails. Repeat for opposite side.
STEP 5
Adjust to desired length and crimp one cord end on each side. Open two oval jumprings and attach one to each cord end.
STEP 6
Open one end of the "S" clasp and slip through jumpring on cord end. Slide on one end of chain. Close down that end of the "S" clasp.
STEP 7
Open one 8mm jumpring and attach to one Swarovski pendant art. 6470 40mm olivine. Open one oval jumpring and link to 8mm jumpring. Open second oval jumpring and link to one hammertone rectangle and oval jumpring previously added. Open third oval jumpring and attach to the top end of the hammertone rectangle and the end of the chain.
STEP 8
Cut remaining 22-gauge wire into 6 equal pieces. Using one piece turn a loop at one end of wire and flatten. Repeat five more times.
STEP 9
Using one piece slide on one bead art. 5601 4mm and turn a simple loop. Repeat five times.
STEP 10
Open the loop from the unit above and attach to the last link of chain connected to the oval jumpring. Repeat five times.

Have a question regarding this project? Email Customer Service.

Copyright Permissions

Permission to copy this instruction sheet is granted for non-commercial educational purposes only. All other reproduction requires written permission. Please email copyrightpermission@firemtn.com for more information.

´╗┐
Sign Up for Email Specials and Beading News
Sign Up
for Email Specials and Beading News