Home
TierraCast Sale

Pendant with Swarovski Crystal

Courtesy of Swarovski
CA55

Triple Crystal Corn Pendant
Get inspired by Swarovski design team's limitless imagination. Magical project ideas bring a new dimension to simple techniques.

: : : Materials : : :

3mm Crystal Corn Pendant

STEP 1
Cut a 12-inch piece of wire.
STEP 2
Load onto wire thirteen Xilion beads art. 5328 3mm sunflower from the Swarovski crystal assortment. Moving six beads off to one side and keeping the seven remaining beads in the center of the wire, take the wire exiting from the six beads and string the wire through all seven beads. (Note: the wire tails should be exiting in opposite directions from the seven beads. The six beads should be sitting on top and in between the seven beads. It is important to keep tension on the wire when weaving.)
STEP 3
String onto one of the wire sides, five beads art. 5328 3mm hyacinth. Take the wire from the side with no beads and string the wire through the five beads. (Note: the wire tails should be exiting in opposite directions from the five beads art. 5328 hyacinth and the five beads should be sitting on top and in between the six beads art. 5328 sunflower from the previous step.)
STEP 4
Repeat Step 3 using four beads art. 5328 3mm hyacinth.
STEP 5
Repeat Step 4 using three beads art. 5328 3mm hyacinth.
STEP 6
Repeat Step 5 using two beads art. 5328 3mm white alabaster.
STEP 7
Repeat Step 6 using one bead art. 5328 3mm white alabaster.
STEP 8
Take both tails of the remaining wire and working the wire together create a wire-wrapped loop. Set aside.

4mm Crystal Corn Pendant

STEP 1
Cut an 18-inch piece of wire.
STEP 2
Load onto wire three Swarovski Xilion beads art. 5328 4mm sunflower, the 3mm crystal corn pendant made above and ten beads art. 5328 4mm sunflower. Moving six beads off to one side and keeping the seven remaining beads in the center of the wire, take the wire exiting from the six beads and string the wire through all seven beads. (Note: the wire tails should be exiting in opposite directions from the seven beads. The six beads should be sitting on top and in between the seven beads. It is important to keep tension on the wire when weaving.)
STEP 3
String onto one of the wire sides, five beads art. 5328 4mm hyacinth. Take the wire from the opposite side and string through the five beads. (Note: the wire tails should be exiting in opposite directions from the five beads art. 5328 hyacinth and the five beads should be sitting on top and in between the six beads art. 5328 sunflower from the previous step.)
STEP 4
Repeat Step 3 using four beads art. 5328 4mm hyacinth.
STEP 5
Repeat Step 4 using three beads art. 5328 4mm hyacinth.
STEP 6
Repeat Step 5 using two beads art. 5328 4mm white alabaster.
STEP 7
Repeat Step 6 using one bead art. 5328 4mm white alabaster.
STEP 8
Take both tails of the remaining wire and working the wire together create a wire-wrapped loop. Set aside.

5mm Crystal Corn Pendant

STEP 1
Using the remaining wire, load onto wire four Swarovski Xilion beads art. 5328 5mm sunflower, the 4mm crystal corn pendant made above (with the 3 mm pendant attached) and nine beads art. 5328 5mm sunflower. Moving six beads off to one side and keeping the seven remaining beads in the center of the wire, take the wire exiting from the six beads and string the wire through all seven beads (and pendant). (Note: the wire tails should be exiting in opposite directions from the seven beads. The six beads should be sitting on top and in between the seven beads. It is important to keep tension on the wire when weaving.)
STEP 2
String onto one of the wire sides five beads art. 5328 5mm hyacinth. Take the wire from the opposite side and string through the five beads. (Note: the wire tails should be exiting in opposite directions from the five beads art. 5328 hyacinth and the five beads should be sitting on top and in between the six beads art. 5328 sunflower from the previous step.)
STEP 3
Repeat Step 2 using four beads art. 5328 5mm hyacinth.
STEP 4
Repeat Step 3 using three beads art. 5328 5mm hyacinth.
STEP 5
Repeat Step 4 using two beads art. 5328 5mm white alabaster.
STEP 6
Repeat Step 5 using one bead art. 5328 5mm white alabaster.
STEP 7
Take both tails of the remaining wire and working the wire together create a wire-wrapped loop.
STEP 8
String the leather through the loop on top of the 5mm crystal corn. Make an overhand knot with the tails of the leather.

Have a question regarding this project? Email Customer Service.

Copyright Permissions

Permission to copy this instruction sheet is granted for non-commercial educational purposes only. All other reproduction requires written permission. Please email copyrightpermission@firemtn.com for more information.


Sign Up for Email Specials and Beading News
Sign Up
for Email Specials and Beading News