Close
Home

Open and Lock a Link Lock, How-To

by Tammy Honaman, Author, Jewelry-Making Expert and Educator,
Exclusively for Fire Mountain Gems and BeadsĀ®
A137

To Open:

STEP 1
Using two pairs of chain-nose pliers, grasp each end of the link lock. Open the link lock using a twisting motion until the opening is large enough to slide a finding, clasp or wired element onto it.
STEP 2
Place the items being connected onto the open link lock. Then twist the link lock back until the end of the wire lines up with the hole in the locking mechanism.

To Lock:

STEP 3
Grasp the ends of the link with chain-nose pliers. Push in on the open side of the link until the end is inserted into the locking mechanism as far as it will go.
STEP 4
Using the tip of a pair of chain-nose pliers, gently close the latch down into place until it is flush with the rest of the locking mechanism.

Have a question regarding this project? Email Customer Service.

Copyright Permissions

Permission to copy this instruction sheet is granted for non-commercial educational purposes only. All other reproduction requires written permission. Please email copyrightpermission@firemtn.com for more information.