Close
Home

Rotary Hole Punch Tool

by Michelle Wood, Jewelry-Making Expert, Exclusively for Fire Mountain Gems and BeadsĀ®
C360


Hand-held steel rotary punch for leather work. The rotary tool boasts six punches of the most commonly used hole sizes (2mm, 2.5mm, 3mm, 3.5mm, 4mm and 5mm) that lock in place when selected. Tool will punch 8 - 9 ounce belt weight cowhide (4mm thickness). Comfortable grip handles.

: : : Materials : : :

STEP 1
Rotate punch wheel until desired punch size is aligned with the lower jaw of the tool. Locking arm will snap into place when correctly aligned.
STEP 2
Insert a leather piece between the jaws of the punch tool at desired position. Be sure to have tool horizontally level to avoid punching hole at an angle.

Note: Laying a thinner scrap piece of leather between the strike plate and leather to be punched will result in a cleaner hole and help protect the strike plate keeping the tool sharp.
STEP 3

Firmly squeeze handle grips until punch penetrates completely through the leather, then release the grips.

Have a question regarding this project? Email Customer Service.

Copyright Permissions

Permission to copy this instruction sheet is granted for non-commercial educational purposes only. All other reproduction requires written permission. Please email copyrightpermission@firemtn.com for more information.