Three Piece Necklace Set with Coral Beads and Silver-Plated Brass Beads
Hover over to zoom.
Design Idea RD37
-- Designer --
Patti, Jewelry Designer, Exclusively for Fire Mountain Gems and Beads®
To learn more about Patti Miller, read her jewelry artist success story here.
: : : Materials : : :
Click here to view a full list of materials used in this design.
Please take the creative opportunity to select the products of your choice for this design, offered here at Fire Mountain Gems and Beads. Some materials may not be available or listed.
- Jump ring, silver-plated brass, 4mm round, 2.4mm inside diameter, 20 gauge
- Bead, silver-finished steel, 6x1mm heishi
- Bead, silver-plated brass, 6mm filigree round
- Jump ring, silver-plated brass, 5mm round, 3.4mm inside diameter, 20 gauge
- Sterling silver, cut tube crimp, 2mm / 1.3-1.4mm inside diameter
- Clasp, hook-and-eye, silver-plated brass, 10x6mm flat wire
- Beading wire, Accu-Flex®, nylon and stainless steel, pearl, 49 strand, 0.019-inch diameter
- Bead, silver-plated brass, 6mm weave round with cutouts
- Bead, coral (dyed), red, 6x3mm hand-cut round tube, Mohs hardness 3-1/2 to 4
- Bead, bamboo coral (dyed), red, 6mm hand-cut drum, B- grade, Mohs hardness 3-1/2 to 4
- Bead, coral (dyed), red, 6x3mm hand-cut heishi, Mohs hardness 3-1/2 to 4
- Crimp cover, silver-plated brass, 4mm corrugated round.
- Wire protector, Accu-Guard™, sterling silver, 5mm tube with 0.5mm inside diameter
Instructions
Necklace 1
Step 1
Cut one 20-inch length of .019 49 strand Pearl Accuflex
Step 2
Crimp one end of the Accuflex using a 2mm sterling silver crimp tube, a 5mm silver plated Accuguard and a 4mm silver plated corrugated crimp cover.
Thread onto the Accuflex:
• 12 red coral tube beads
• One 6mm silver-plated cut-out round bead
• One 6x1mm silver-finished heishi bead
• One 6x6 red coral drum bead
• One 6x1mm silver-finished heishi bead
• Five 6x3 red coral heishi beads
• Three 6mm silver-plated round filigree bead
• Five 6x3 red coral heishi beads
• One 6x1mm silver-finished heishi bead
• One 6x6 red coral drum bead
• One 6x1mm silver-finished heishi bead
• One 6mm silver-plated cut-out round bead
• One 6x1mm silver-finished heishi bead
• Five 6x3 red coral heishi beads
• One 6x1mm silver-finished heishi bead
• One 6mm silver-plated cut-out round bead
• One 6x1mm silver-finished heishi bead
• One 6x6 red coral drum bead
• One 6x1mm silver-finished heishi bead
• Five 6x3 red coral heishi beads
• Seven 6mm silver-plated round filigree beads
• Five 6x3 red coral heishi beads
• One 6x1mm silver-finished heishi bead
• One 6x6 red coral drum bead
• One 6x1mm silver-finished heishi bead
• One 6mm silver-plated cut-out round bead
• One 6x1mm silver-finished heishi bead
• Five 6x3 red coral heishi beads
• One 6x1mm silver-finished heishi bead
• One 6mm silver-plated cut-out round bead
• One 6x1mm silver-finished heishi bead
• One 6x6 red coral drum bead
• One 6x1mm silver-finished heishi bead
• Five 6x3 red coral heishi beads
• Three 6mm silver-plated round filigree bead
• Five 6x3 red coral heishi beads
• One 6x1mm silver-finished heishi bead
• One 6x6 red coral drum bead
• One 6x1mm silver-finished heishi bead
• One 6mm silver-plated cut-out round bead
• 12 red coral tube beads
Crimp the end of the Accuflex as you did the first end and cut off the remaining tail.
Step 3
Add the hook end of a 10x6 silver plated hook and eye clasp to one end of the necklace using a 4mm 20 gauge silver plated jump ring.
Add the eye end of a 10x6 silver plated hook and eye clasp to one end of the necklace using a 4mm 20 gauge silver plated jump ring.
Necklace 2
Step 1
Cut one 20-inch length of .019 49 strand Pearl Accuflex
Step 2
Crimp one end of the Accuflex using a 2mm sterling silver crimp tube, a 5mm silver plated Accuguard and a 4mm silver plated corrugated crimp cover.
Thread onto the Accuflex:
• 25 6x3 red coral tube beads
• One 6mm silver-plated round filigree bead
• One 6x1mm silver-finished heishi bead
• One 6x1mm silver-finished heishi bead
• One 6mm silver-plated round filigree bead
• 25 6x3 red coral tube beads
Crimp the end of the Accuflex as you did the first end and cut off the remaining tail.
Step 3
Add the hook end of a 10x6 silver plated hook and eye clasp to one end of the necklace using a 4mm 20 gauge silver plated jump ring.
Add the eye end of a 10x6 silver plated hook and eye clasp to one end of the necklace using a 4mm 20 gauge silver plated jump ring.
Necklace 3
Step 1
Cut one 20-inch
length of .019 49 strand Pearl Accuflex
Step 2
Crimp one end of the Accuflex using a 2mm sterling silver crimp tube, a 5mm silver plated Accuguard and a 4mm silver plated corrugated crimp cover.
Thread onto the Accuflex:
• 17 6x3 red coral tube beads
• One 6x1mm silver-finished heishi bead
• One 6mm silver-plated cut-out round bead
• One 6x1mm silver-finished heishi bead
• 7 6x3 red coral tube beads
• One 6x1mm silver-finished heishi bead
• Three 6mm silver-plated cut-out round bead
• One 6x1mm silver-finished heishi bead
• 7 6x3 red coral tube beads
• One 6x1mm silver-finished heishi bead
• One 6mm silver-plated cut-out round bead
• One 6x1mm silver-finished heishi bead
• 17 6x3 red coral tube beads
Crimp the end of the Accuflex as you did the first end and cut off the remaining tail.
Step 3
Add the hook end of a 10x6 silver plated hook and eye clasp to one end of the necklace using a 4mm 20 gauge silver plated jump ring.
Add the eye end of a 10x6 silver plated hook and eye clasp to one end of the necklace using a 4mm 20 gauge silver plated jump ring.
Copyright Permissions
The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We encourage you to substitute different colors, products and techniques to make the design your own.
All works of authorship (articles, videos, tutorials and other creative works) are from the Fire Mountain Gems and Beads® Collection, and permission to copy is granted for non-commercial educational purposes only. All other reproduction requires written permission. For more information, please email copyrightpermission@firemtn.com.