Five-Piece Necklace and Earring Set with Electroplated Hemalyke™ Beads, Stainless Steel Pendant and Silver-Plated Metal Links and Chain

Hover over to zoom.

Design Idea NE3V

-- Designer --

Rose, Jewelry Designer, Exclusively for Fire Mountain Gems and Beads®

To learn more about Rose Wingenbach, read her jewelry artist success story here.

: : : Materials : : :

Click here to view a full list of materials used in this design.

Please take the creative opportunity to select the products of your choice for this design, offered here at Fire Mountain Gems and Beads. Some materials may not be available or listed.

Pendant, stainless steel, 37x30mm single-sided hinged round locket with cutout tree of life and magnetic closure
Ear wire, silver-finished stainless steel and brass, 15mm flat fishhook with 3mm coil and open loop, 21 gauge
Bead, electroplated Hemalyke™ (man-made), rainbow, 15x3mm top-drilled point
Link, silver-plated brass, 11mm moon face with stars
Locket insert mix, felt, mixed colors, 22mm flat round
Clasp, lobster claw, silver-plated brass, 14x8mm with swivel
Jump ring, silver-plated brass, 8x6mm oval, 5.7x3.6mm inside diameter, 16 gauge
Chain, glass and stainless steel, metallic rainbow, 3.5mm faceted rondelle
Pliers, Wubbers® Designer Mandrel, small triangular mandrel, steel and rubber, 7 inches
Chain, silver-plated steel, 15mm infinity link with 8mm round
Chain, silver-plated steel, 4mm long cable
Chain, silver-plated brass, 2.5mm long and short oval
Chain, silver-plated brass, 8mm hammered marquise
Wire, Zebra Wire™, silver-plated copper, round, 22 gauge
Jump ring, silver-plated brass, 4mm round, 2.4mm inside diameter, 20 gauge

Instructions

Choker Instructions

Step 1

Cut a 15-inch length of infinity link chain.

Step 2

Cut one 1/2 inch length of Zebra Wire™. Use Wubbers® small triangle mandrel pliers to bend the wire into a bail and attach to a Hemalyke™ spike bead. Repeat to add a bail to a total of 17 spike beads.

Step 3

Use a round jump ring to attach the bail of a spike bead to the outer edge of the center link of the chain. Repeat to add the remaining drops to every other link on the same side of the chain, eight to either side of the first drop.

Step 4

Open an oval jump ring. Slide on one end of the infinity chain and two round jump rings then close the oval.

Open a new oval jump ring. Slide on the previous two round jump rings and two new round jump rings. Close the oval.

Continue this process to create an extender chain with six ovals. Repeat Steps 2 and 3 to add a Hemalyke bead to the end of the chain.

Step 5

Use an oval jump ring to attach a clasp to the other end of the necklace.

Tree of Life Necklace Instructions

Step 1

Cut a 21-inch length of cable chain.

Step 2

Place a green felt insert inside the tree of life pendant. Slide the pendant onto the chain.

Step 3

Use a round jump ring to attach a clasp to one end of the chain. Add a second jump ring to the opposite end.

Moon and Stars Necklace Instructions

Step 1

Cut two 7-inch lengths and five 2-inch lengths of long and short oval chain.

Step 2

Use a round jump ring to attach a moon face link to one end of 7-inch chain. Use a round jump ring to attach one end of 2-inch chain to the other side of the link.

Continue to add one link, one 2-inch chain, one link, one 2-inch chain, one link, one 2-inch chain, one link, one 2-inch chain, one link and the other 7-inch chain.

Step 3

Use a round jump ring to attach a clasp to one end of the necklace. Attach an oval jump ring to the other end.

Glass Rondelle Necklace Instructions

Step 1

Cut a 30-inch length of glass metallic rainbow chain.

Step 2

Use a round jump ring to attach a clasp to one end of chain.

Attach an oval jump ring to the other end.

Marquise Chain Necklace Instructions

Step 1

Cut a 32-inch length of hammered marquise chain.

Step 2

Use an oval jump ring to attach a clasp to one end of the chain.

Earring Instructions

Step 1

Cut one 1/2 inch length of Zebra Wire and a single link of infinity chain.

Step 2

Bend the wire into a bail and attach a Hemalyke bead.

Step 3

Use a round jump ring to attach the Hemalyke bead to the infinity link. Attach an ear wire to the other side of the link.

Step 4

Repeat Steps 1 - 3 to create a second earring.

Have a question regarding this project? Email Customer Service.

Copyright Permissions

The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We encourage you to substitute different colors, products and techniques to make the design your own.

All works of authorship (articles, videos, tutorials and other creative works) are from the Fire Mountain Gems and Beads® Collection, and permission to copy is granted for non-commercial educational purposes only. All other reproduction requires written permission. For more information, please email copyrightpermission@firemtn.com.