Bracelet with Crystal Passions® Beads
-- Designer --
Jude, Exclusively for Fire Mountain Gems and Beads®
To learn more about Jude Wroblewski, read her jewelry artist success story here
- Bead, Crystal Passions, emerald, 3mm bicone (27 beads)
- Bead, Crystal Passions, light Siam, 4mm bicone (39 beads)
- Bead, Crystal Passions, crystal AB, 8mm faceted star (4 beads)
- Bead, Crystal Passions, crystal AB, 12mm faceted star (2 beads)
- Crimp cover, gold-plated brass, 3mm round (2 crimp covers)
- Crimp, gold-plated brass, 2x1.5mm round, 1.3mm inside diameter (2 crimps)
- Wire protector, Accu-Guard, gold-plated brass, 4mm tube, 0.5mm inside diameter (2 wire protectors)
- Jump ring, gold-plated brass, 4mm round, 2.4mm inside diameter, 20 gauge (13 jump rings)
- Head pin, gold-plated brass, 3/4 inch with 1.5mm ball, 24 gauge (31 head pins)
- Beading wire, Accu-Flex, nylon and stainless steel, clear, 21 strand, 0.024-inch diameter
- Pliers, flush-cutter
- Pliers, crimping
- Pliers, chain-nose
- Pliers, round-nose
- Pliers, bent-nose
-
Clasp, lobster claw, cubic zirconia and gold-finished brass, clear, 14x10mm double-sided with (2) 5mm jump rings
-
- Optional:
-
- Clasps, lobster claw
STEP 1
Cut one 10-inch length of Accu-Flex® professional-quality beading wire.
STEP 2
String one emerald 3mm bicone onto one 3/4 inch head pin then form a simple loop on the straight end of the wire to create one bicone drop. Repeat to create a total of 13 bicone drops.
String one emerald 3mm bicone onto one 3/4 inch head pin then form a simple loop on the straight end of the wire. Pass one 4mm jump ring through the simple loop then close to create one jump ring bicone drop. Repeat to create a total of 13 jump ring bicone drops.
STEP 3
String one 8mm star bead onto one 3/4 inch head pin then form a simple loop on the straight end of the wire to create one small star drop.
String one 8mm star bead onto one 3/4 inch head pin then form a simple loop on the straight end of the wire. Connect one 4mm jump ring to the simple loop to create one small jump ring star drop. Repeat to create a total of three small jump ring star drops.
STEP 4
String one emerald 3mm bicone and one 12mm star bead onto one 3/4 inch head pin then form a simple loop on the straight end of the wire. Connect one 4mm jump ring to the simple loop to create one large star drop.
STEP 5
String onto the beading wire one crimp and one Accu-Guard™ wire protector. Pass the beading wire back through the crimp. Pull the beading wire so the crimp rests snug against the Accu-Guard, leaving approximately 1/4 inch of beading wire on the end then crimp. Finish with a crimp cover.
STEP 6
String the following onto the beading wire:
-
16 light Siam 4mm bicones
-
One small star drop
-
Two light Siam 4mm bicones
-
Four sets of:
-
One bicone drop
-
One jump ring bicone drop
-
One light Siam 4mm bicone
-
One small jump ring star drop
-
Two light Siam 4mm bicones
-
Four sets of:
-
One bicone drop
-
One jump ring bicone drop
-
One light Siam 4mm bicone
-
One small jump ring star drop
-
Two light Siam 4mm bicones
-
Three sets of:
-
One bicone drop
-
One jump ring bicone drop
-
One light Siam 4mm bicone
-
One small jump ring star drop
-
Two light Siam 4mm bicones
-
Two sets of:
-
One bicone drop
-
One jump ring bicone drop
-
One light Siam 4mm bicone
-
One 12mm star bead
-
Two light Siam 4mm bicones
STEP 7
Repeat Step 5 to secure the strand.
STEP 8
Connect the jump ring on the large star drop to one Accu-Guard on one end of the strand. Continue to connect the 5mm jump ring attached to the loop on one lobster claw clasp to the same Accu-Guard.
Connect the second 5mm jump ring of the lobster claw clasp to the remaining Accu-Guard on the opposite end of the strand.
: : : Additional Resources : : :
The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We
encourage you to substitute different colors, products and techniques to make the design your own.
Have a question regarding this design idea? Email Customer Service.
Create Your Account.png)
