Gift Box "Love" with Swarovski Crystal
Gift Box "Love"
-- Designer --
Courtesy of Swarovski
- Focal, Swarovski crystal, crystal clear, 40x18mm navette pendant
- Bead, Swarovski crystal, Siam, 3mm round
- Bead, Swarovski crystal, dark red coral, 3mm bicone
- Pearl, Swarovski crystal, white, 3mm round
- Drop, Swarovski crystal, Siam, 14mm heart
- Drop, Swarovski crystal, Siam, 18mm heart
- Silkon nylon thread
- Beading needles
- Thread, nylon
- Box, 17x17
Double-sided sticky tape
Get inspired by Swarovski design team's limitless imagination. Magical project ideas bring a new dimension to simple techniques.
Cut 1 m of the 0.25 mm nylon thread and slide on the Swarovski crystal Pendant article 6202, 14.4x14mm, Siam. Leave one end with just about 7 cm--then make a double knot with both thread ends. Cut 30 cm of the 0.25 mm nylon thread and slide on the Swarovski crystal Pendant article 6202, 18x17.5 mm, Siam. Leave one end with just about 7 cm--then make a double knot with both thread ends.
Slide Swarovski crystal onto both nylon thread ends of small heart as you see in illustration.
Slide Swarovski crystal onto both nylon thread ends of bigger heart as you see in illustration. Then knot nylon thread ends of small heart and big heart together as shown--thread the nylon back through some crystals and cut off excess.
Form loops with the beaded string as you see in illustration.
Cut 0.5 m of the 0.25 mm nylon thread and tie it around the loops as you see in illustration.
Cut 1.3 m of the satin ribbon and form a loop and secure with a pin. Form another small loop and secure it with a pin also.
Form to the right side a loop as you see in illustration and secure it with a pin. Form another loop on the left side and secure it again with a pin. Repeat this step twice so that you have 3 loops on each side.
Cut off the excess of satin ribbon as shown in illustration and sew the bow together in the middle. Remove the pins.
Attach a Swarovski crystal Pendant article 6110 to the nylon threads with which you fixed the bead loops and go through the Pendant twice with both threads. Sew loops and Pendants onto inside of bow as you see in illustration. Cut off remaining threads.
Cut 30 cm of satin ribbon and secure the bow in the middle with some pins. Then sew bow with a needle and a piece of nylon thread onto a stripe of satin ribbon.
Put some double-sided sticky tape onto back side of strip of satin ribbon.
Attach to the cover of your gift box.
: : : Additional Resources : : :
The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We
encourage you to substitute different colors, products and techniques to make the design your own.
Have a question regarding this design idea? Email Customer Service.